Designed for Tyrolean traverses on cable or rope. Maximum allowable speed: 10 m/s
Stainless steel sheaves for excellent durability. Sheaves mounted on self-lubricating bushings for g
Accepts up to three carabiners to facilitate use
Designed for Tyrolean traverses on cable or rope. Maximum allowable speed: 10 m/s
Stainless steel sheaves for excellent durability. Sheaves mounted on self-lubricating bushings for g
Accepts up to three carabiners to facilitate use
Designed to maneuver heavy loads or for intensive use
Large diameter sheave mounted on sealed ball bearings for excellent efficiency
Accepts up to three carabiners to facilitate rope maneuvers
Ultra-light and ultra-compact progress capture pulley (volume and weight 50 % smaller than the Mini Traxion)
Excellent efficiency, thanks to sealed ball bearings (91 %)
Cam can be locked in open position so device can be used as a simple pulley. Works even on frozen or muddy ropes
Designed for Tyrolean traverses on cable or rope. Maximum allowable speed: 20 m/s
Sheaves mounted on sealed ball bearings for sustained speed, independent of the weight of the person
Stainless steel sheaves for excellent durability. Accepts up to three carabiners to facilitate use
Weight: 10 g
Rope diameter: 7-13 mm
Working Load: 1 kN
Allows a hauling system to be set up when used with a mechanical ascender
Also useful for redirection of the rope to avoid rope drag and wear
High efficiency due to the sheave mounted on self-lubricating bushings
Swing-sided pulley for emergency use
Quick and easy installation due to the swinging side plates
Nylon sheave and aluminum side plates for excellent strength to weight ratio
Special side plates designed for use with a Prusik friction hitch in lightweight progress capture systems
Parallel mounted sheaves and auxiliary attachment point for creating different types of hauling systems, even the most complex
Sheave mounted on sealed ball bearings for excellent efficiency
Adjustable Vents: no
Material: polycarbonate plastic
Recommended Use: replacement lens for Kask Bambino helmet
Quick and easy headband adjustment, even while the helmet is being worn
OMEGA headband system specially designed for easy donning and removal of helmet
Headlamp can be attached using the four integrated clips
Durable hard plastic shell, upgraded, tougher EPS inner.
9 openings for good ventilation. Headlamp clips integrated into design
Thumb wheel for effective and quick adjustment to head size
Enclosed bearing for smooth operation
Clip-ins accommodate up to three carabiners