New cam facilitates passage of the rope through device, even on the first meters
Cam is totally integrated into the body of the rope clamp to help prevent rubbing
Rope diameter: 8 mm/13 mm
New cam facilitates passage of the rope through device, even on the first meters
Cam is totally integrated into the body of the rope clamp to help prevent rubbing
Rope diameter: 8 mm/13 mm
Used with a BASIC ascender or with an ASCENSION handled ascender for rope ascents
Toothed cam with self-cleaning slot optimizes performance under any conditions (e.g. frozen or dirty ropes)
Stainless steel cam has better resistance to corrosion. Stainless steel wear plate for improved durability
A lightweight, compact multi-purpose ascender that works perfectly for hauling systems, ascending fixed lines and for self-protection when climbing with a fixed rope.
Chrome-plated steel cam with angled teeth and self-cleaning slot securely grips the rope, even in muddy or icy conditions
Two attachment points allow for different uses (e.g. self- belaying, haul systems, etc.)
TIBLOC Compact emergency ascender. In a bind, this ultra-lightweight ascender can be used to build hauling systems or as a Prusik-replacement in self-rescue situations. Use with the ULTRALEGERE pulley for a lightweight emergency hauling kit. Chrome-plated steel cam with angled teeth and self-cleaning slot securely grips the rope, even in muddy or icy conditions. Can […]
Removable axle can be used to install or remove the clamp at any point on the rope
Locking pin reduces the risk of undoing the system accidentally
A durable PVC sleeve, lightweight and supple
The Velcro closure and clip make it easy to place and remove from the rope
Weight: 3.35 oz / 95g
Rope protector
Durable PVC sleeve, lightweight and supple
Velcro closure and clip make it easy to place and remove from the rope
Pulley for tyroleans. Perfectly suited for public use in forest adventure parks
Easily installed with one hand; minimizing the chance of an installation error
VERTIGO with carabiner with Keylock system (snag-free body / gate interface)
Anodized frames are color coded for easy identification (black -left / gray -right)
195g
For use with ropes between 8 and 13 mm in diameter
Minimum rope diameter: 7 mm
Maximum rope diameter: 13 mm
Sheave diameter: 38 mm
Minimum rope diameter: 7 mm
Maximum rope diameter: 11 mm
Sheave diameter: 25 mm
Special side plates designed for use with a Prusik friction hitch in lightweight progress capture systems
Sheave mounted on sealed ball bearings for excellent efficiency
Flat, compact and lightweight
Minimum rope diameter: 7 mm
Maximum rope diameter: 13 mm
Sheave diameter: 21 mm
Designed for Tyrolean traverses on cable or rope. Maximum allowable speed: 10 m/s
Stainless steel sheaves for excellent durability. Sheaves mounted on self-lubricating bushings for g
Accepts up to three carabiners to facilitate use
Designed to maneuver heavy loads or for intensive use
Large diameter sheave mounted on sealed ball bearings for excellent efficiency
Accepts up to three carabiners to facilitate rope maneuvers
Ultra-light and ultra-compact progress capture pulley (volume and weight 50 % smaller than the Mini Traxion)
Excellent efficiency, thanks to sealed ball bearings (91 %)
Cam can be locked in open position so device can be used as a simple pulley. Works even on frozen or muddy ropes
Minimum rope diameter: 7 mm
Maximum rope diameter: 13 mm
Sheave diameter: 51 mm
Designed for Tyrolean traverses on cable or rope. Maximum allowable speed: 20 m/s
Sheaves mounted on sealed ball bearings for sustained speed, independent of the weight of the person
Stainless steel sheaves for excellent durability. Accepts up to three carabiners to facilitate use