Leather construction
Has tool slots for two erection wrenches
Holds adjustable head construction wrench catalog No. 3239
Leather construction
Has tool slots for two erection wrenches
Holds adjustable head construction wrench catalog No. 3239
Forged from highest quality alloy steel
Five wrench sizes: 1/4-Inch, 3/8-Inch, 1/2-Inch, 9/16-Inch, 11/16-Inch
Corrosion resistant
7-Piece wrench set
Combination wrenches
Includes pouch with marked pockets for each wrench
Set contains: 68410, 68411, 68412, 68413, 68414, 68415, 68416, 68417, 68418, 68419, 68420 and 68421
12-Piece combination wrench set
Includes pouch with marked pockets for each wrench
Forged from highest quality alloy steel
Seven wrench sizes: 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch, 1/2-Inch, 9/16-Inch, 5/8-Inch
Corrosion resistant
Set contains: 68412, 68413, 68414, 68415, 68416, 68417, 68418, 68419, 68420, 68421, 68422, 68423, 68424, and 68425
14-Piece combination wrench set
Includes pouch with marked pockets for each wrench
11-Piece wrench set
Combination wrenches
Includes pouch with marked pockets for each wrench
Similar to Bell-System type B strand puller
Designed to pull 1/4-Inch (6.35 mm) figure-8 telephone cable
Serpentine grooves grip insulation on strand, preventing slippage
Equipped with chain, toggle and shackle
5-Inch jaw length
.218-Inch-.55-Inch cable range
1684-5AT is identical to Bell-System type L strand puller
Equipped with chain, toggle and shackle
5-Inch jaw length
Designed for use when light, compact grip is desired and where conductor damage is not a factor
Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.35 mm) cable area
Has a swing latch to help hold cable in the jaw
Designed for use when light, compact grip is desired and where conductor damage is not a factor
Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.35 mm) cable area
Has a swing latch to help hold cable in the jaw
Designed for use when light, compact grip is desired and where conductor damage is not a factor
Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.35 mm) cable area
Has a swing latch to help hold cable in the jaw
Designed for use when light, compact grip is desired and where conductor damage is not a factor
Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.35 mm) cable area
2.08-Pound (1.14) g max cable
Approximate weight of each: 2.08-Pounds
Designed for use when light, compact grip is desired and where conductor damage is not a factor
Gripping pressure of the knurled jaw is applied to 1/4-Inch cable area
Approximate weight of each: 1-Pounds
Designed for use when light, compact grip is desired and where conductor damage is not a factor
Gripping pressure of the knurled jaw is applied to 1/4-Inch cable area
1628-16AT is identical to Bell-System type H strand puller
Equipped with chain, toggle and shackle
7-1/4-Inch jaw length
A family of grips for cable sizes from .12-Inch (3.10 mm) to 1.0-Inch (25.4 mm)
Double V grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
7-1/4-Inch jaw length