Climb communication towers to install, replace, or repair antennas or auxiliary equipment used to transmit and receive radio waves.

Inspect completed work to ensure all hardware is tight, antennas are level, hangers are properly fastened, proper support is in place, or adequate weather proofing has been installed.

Install all necessary transmission equipment components, including antennas or antenna mounts, surge arrestors, transmission lines, connectors, or tower-mounted amplifiers (TMAs).

Install or repair tower lighting components, including strobes, beacons, or lighting controllers.

Install, connect, or test underground or aboveground grounding systems.

Lift equipment into position, using cranes and rigging tools or equipment such as Capstan Hoist,gin poles.

Perform maintenance or repair work on existing tower equipment, using hand or power tools.

Read work orders, blueprints, plans, datasheets or site drawings to determine work to be done.

Replace existing antennas with new antennas as directed.

Run appropriate power, ground, or coaxial cables.

Test operation of tower transmission components, using sweep testing tools or software.

Climb towers to access components, using safety equipment, such as full-body harnesses.

Complete reports related to project status, progress, or other work details, using computer software.

Locate tower sites where work is to be performed, using mapping software.

Take site survey photos or photos of work performed, using digital cameras.

Transport equipment to work sites, using utility trucks and equipment trailers.

Bolt equipment into place, using hand or power tools.

Train new crew

Oversee a crew of 4

CMTS WirelessDenverCO

Tower Lead March 2014 - May 2014

Verizon 4G upgrade.

Bolt equipment into place, using hand or power tools.

Check antenna positioning to ensure specified azimuths or mechanical tilts and adjust as necessary.

Climb communication towers to install, replace, or repair antennas or auxiliary equipment used to transmit and receive radio waves.

Inspect completed work to ensure all hardware is tight, antennas are level, hangers are properly fastened, proper support is in place, or adequate weather proofing has been installed.

Install all necessary transmission equipment components, including antennas or antenna mounts, surge arrestors, transmission lines, connectors, or tower-mounted amplifiers (TMAs).

Install or repair tower lighting components, including strobes, beacons, or lighting controllers.

Install, connect, or test underground or aboveground grounding systems.

Lift equipment into position, using cranes and rigging tools or equipment such as gin poles.

Perform maintenance or repair work on existing tower equipment, using hand or power tools.

Read work orders, blueprints, plans, datasheets or site drawings to determine work to be done.

Replace existing antennas with new antennas as directed.

Run appropriate power, ground, or coaxial cables.

Test operation of tower transmission components, using sweep testing tools or software.

Climb towers to access components, using safety equipment, such as full-body harnesses.

Complete reports related to project status, progress, or other work details, using computer software.

Locate tower sites where work is to be performed, using mapping software.

Take site survey photos or photos of work performed, using digital cameras.

Transport equipment to work sites, using utility trucks and equipment trailers.

Sage System TechnologiesAK

Tower Lead January 2013 - April 2014

T-Mobile,Sprint Vision,AT&T 1c

Bolt equipment into place, using hand or power tools.

Check antenna positioning to ensure specified azimuths or mechanical tilts and adjust as necessary.

Climb communication towers to install, replace, or repair antennas or auxiliary equipment used to transmit and receive radio waves.

Inspect completed work to ensure all hardware is tight, antennas are level, hangers are properly fastened, proper support is in place, or adequate weather proofing has been installed.

Install all necessary transmission equipment components, including antennas or antenna mounts, surge arrestors, transmission lines, connectors, or tower-mounted amplifiers (TMAs).

Install or repair tower lighting components, including strobes, beacons, or lighting controllers.

Install, connect, or test underground or aboveground grounding systems.

Lift equipment into position, using cranes and rigging tools or equipment such as gin poles.

Perform maintenance or repair work on existing tower equipment, using hand or power tools.

Read work orders, blueprints, plans, datasheets or site drawings to determine work to be done.

Replace existing antennas with new antennas as directed.

Run appropriate power, ground, or coaxial cables.

Test operation of tower transmission components, using sweep testing tools or software.

Climb towers to access components, using safety equipment, such as full-body harnesses.

Complete reports related to project status, progress, or other work details, using computer software.

Locate tower sites where work is to be performed, using mapping software.

Take site survey photos or photos of work performed, using digital cameras.

Transport equipment to work sites, using utility trucks and equipment trailers.

Ran my own crew of 6

Vt Milcom JacksonvilleFL

Painter 1 / Structual Technician November 2006 - March 2013

Installation of communication/IT equipment aboard US Naval Ships and US Military Installations.

Inspect and test electrical systems and equipment to locate and diagnose malfunctions, using visual inspections, testing devices, and computer software.

Reassemble and test equipment after repairs.

Splice wires with knives or cutting pliers, and solder connections to fixtures, outlets, and equipment.

Install new fuses, waveguide,coaxial cable,electrical,data and fiber optic cables or power sources as required.

Locate and remove or repair circuit defects such as blown fuses or malfunctioning transistors.

Adjust, repair, or replace defective wiring and relays in ignition, lighting, air-conditioning, and safety control systems, using electrician's tools.

Refer to schematics and manufacturers' specifications that show connections and provide instructions on how to locate problems.

Maintain equipment service records.

Cut openings and drill holes for fixtures, outlet boxes, and fuse holders, using electric drills and routers.

Measure, cut, and install frameworks and conduit to support and connect wiring, control panels, and junction boxes, using hand tools.

Install electrical equipment such as air-conditioning, heating, or ignition systems and components such as generator brushes and commutators, using hand tools.

Install fixtures, outlets, terminal boards, switches, and wall boxes, using hand tools.

Confer with customers to determine the nature of malfunctions.

Education

Orange Park HighOrange ParkFL

High School Diploma, Jun 2005

Bluestream Climber Safety/Rescue training course. (2014)

Safety One competent climber,towertop rescue certification.(2013) NAVSEA Shipboard Man-Aloft training.(2007)

OSHA 10 certification(2014)

OSHA 10 awareness.(2014)

OSHA Maritime certification.(2012,2011,2010,2009,2008,2007,2006) DOT regulation training.(2013,2014)

DOT medical certification(2013,2014)

CPR/First Aid certification.(2014,2013)

CSI JLG,Scissor Lift,Boom Truck Operator Licensed.(2013)

AT&T 502. training.(2014)

Sprint Vision training.(2013)

Andrews Fiber Optic connector building training.(2009)

NAVSEA Multi-pin,Coaxial,Fiber optic connector(2008,2011)

Many NAVSEA training certifications.(2006-2012)

Additional Skills

Shipboard insulation,lagging, and painting. Extensive experience with grinders,drills, plasma cutters, welding machines, needle guns, and megger.

References

Richard Vazquez co-worker xxx-xxx-xxxx

Daniel Prestridge co-worker/Climber xxx-xxx-xxxx

Duane Barham Vt Welding Supervisor xxx-xxx-xxxx

Gary Boozer Climber xxx-xxx-xxxx

Herving Catchings Co-worker xxx-xxx-xxxx