To obtain a position where I can utilize and enhance my skills as a HS-1 in the telecommunication field with an opportunity for personal growth and advancement.

Conrad .v. Dure`

7614 Arble Drive ,Jacksonville fl,32211

xxx@xxx.com

xxx@xxx.com

Cellxxx-xxx-xxxx

AT&T Certification. Ericsson Certification.

(60007518)-Supplier Awareness, FEI_000_1007-Best Practice

(51446222)-ask yourself FEI_000_1001-SL Introduction

(60065830)-fiber cleaning/inspection, FEI_000_1003-SL Overview Integration

(60065363) Quality Instillation FEI_000_1031- SPRINT 65 Mhz SL ALL PHASE

AT&T 76300/ (60065363) WBL_000_1003-SPRINT 65 Mhz REFRESHER

Knowledge & Experience with : AC power, DC power, Battery strings ,Ericson power,PBC6500, Power wave bays, Argus power bays, Emerson power bay, Tyco power bay, Cabinets, metro cell, Purcell cabinets , Ericsson cabinets RBS , BTS cabinets , WCDMA, Metro Cell , Purcell

Knowledge & Experience with : Installation: of FIF racks, Andrews LMU, Grayson Geometrix LMU, True positioning LMU, Ericsson Cabinets indoor /outdoor 3000/ 6000 , 19 ‘ racks units , GPS cones ,GPS splitters, OVPs/DF- OVP boxes, OVP alarm blocks, SPD Cans, ALU -Routers 5505/5507,Cisco Routers, Alcatel Lucent Routers Installation ,Hot-slides, WCDMA, BBU Add on , new cabinet Build, Ericsson Air21 Antennas

Knowledge & Experience with : commission & Integration : (GSM /DUG- OMT),( UMTS /AWS, DUW,30/, PCS/DUW, LTE/DUL, RBS Element manger ) ( CDMA/EVDO.Vortex)

Knowledge & Experience with : Programs :OMT, , Pro Com Plus , Putty , Hyper terminal , Tera Term,

Total Commander, Ws_FTP , Cesar FTP , Mini link Craft, LDO Apps

Right tech /Com net ,voice , Data

Jacksonville fl.

11/13/2015 4/11/2016

Scope of work install Fiber back bone, Cat 6backe bone , in New building , Financial building, Build New data center , IDF rooms , Relay Racks, 12’ cable racks ,Read Blue P rints /floor plans, Prep for Data Run With J -Hooks and pull string, Route Data Cable through Drop ceiling & Floors to location on floor plan.

Temp work.

HP /Bank of America

Jacksonville .FL , FT. MYERS, FORT CAROLINE,

Financial Center Refresh Program.

3//08/2015- 11/03/2015

Arrived on site, Start Prep work By doing a walk through with Bank Manager ,

Location of Tablet’s, HP laptop, HP Printer and HP Workstation, HP server , UPS power units, Magtek Mini MICR reader , Epson TMU, Card Reader.

Once the Bank of America has done there End of Day and all customers

Have left the building .I will Call HP Call Center and verifier Bank branch ID ,Server ID , before HP Refresh begins, confirm the number of manager station, teller workstation ,customer card read.

From Main Bank server E-mail the confirmation code of ATM shut down & server shut down

To BANK OF AMERICA FINANCIAL, BANK OF AMERICA FINANCIAL will Reply back with cc from HP call Center with conformation ID to proceed with Refresh.

Start with the Main Server power down the main server and UPS unit,then remove it from the FIF Rack, then Install the new Server and UPS unit then power back up , continuo with manager workstation ,refresh monitor ,tower, & keyboard. Proceed with teller workstation, Printers , Tablets, Check Readers, Card readers, MICR Readers, and power back on and wait for the server to have control of the all pcs in the building and card reader

Once network is up and running , verify network completion & ATM on line with HP& BA. Clean up and pack all refresh equipment and stage in location given by BM. Then complete Refresh paper work and submit photos of pack equipment .

Tampa, Georgia, Golf Cost.

Sprint/ Erisson

7/7/2014 2/24/2015 8 month

Scope of work: 65 megahertz migration GEN- 1/ GEN-2, Call test with Ericsson SRS app.

Log in to Sprint bridge network (SNTT) pre check alarms on site, Activate the play button on the ADO APPs/EAMS.

Start BOM list /inventory for a GEN 2 installation. SPDs, power cable ,PDU,BFU, DBA,CEEM, Migrate the DULs and remove XMU, Power up E_node_B, call Network Integration center (NIC) Ask to check for site connectivity then hand over the site for integration, continuo by logging all removed equipment serial number on to a Data sheet, labeled installed equipment, complete per deployment check, and Ericsson installation check list. Photos resize and C.O.P upload to the EAMS .

Installation :DBU to BDA swap: 800/1900

Arrive on site Log in to Sprint bridge network (SNTT) pre check alarms on site, Activate the play button on the ADO/EAMS. Start BOM list /inventory for DBA , Install DBA Dress power cable, and RFM fiber cable , Commission DBA , configure port on the sp210 , check for connectivity hand over to NIC , then complete Deployment check and Ericsson check and upload C.O.P to EAMS.

Installation: CEEM/ AEM card : Log in to Sprint bridge network (SNTT) pre check alarms on site, Activate the play button on the ADO APPs/EAMS. Start BOM list /inventory for CEEM , install fan, AEM card and install unit.

Commission the AEM card the check for connectivity the hand over to NIC .

Tangent In / TNS /Spectrum wireless Tennessee / ATT

Scope of work: SL integration

DUL to DUS, Migration 1st 2 carrier

ACT Testing / NEA Testing

04/10/14- 5/30/14 (7 weeks)

Activate a AMS ticket Log in with ATT NFSD

Start a Site walk through validate correct SFP’s at the SAID and fiber trans port cable , confirm SFP’s to the DUS are installed correctly, verity 15 amp breakers are installed in the power bay verify RRU’s oil fiber cable are installed. Connect to E_node_B /DUS and start Smart Laptop Integration , Call the Ericsson NIC support ,and provide AMS ticket number , the Network support will then load the proxy , and will call back when the License key is ready to be load , once integration /commissioning is completed NIC support will give you scribbling codes , to begin your (ACT testing – Auto call testing ) Network support will aid you with locking down sectors , once ACT testing is completed , E911 testing will done ass will with aid from network support to lock down sectors, NEA testing , verify the correct 15 amp breakers in the power a by , call NEA support With site information ready proceed by validate the Ray cap alarm, and squid alarm. Take NEA form

Number , take pre photos and post photo, sign log book & log out with ATT NSDF.

sit log in with

Orin USA /Parsons

North/South CarolinaT-mobile Modernization

Scope of work -Two Days.

2G, 3G, AWS, PCS, LTE

Lead Field Tech

2/14/13/- 7/5/13 (7month)

Night 1: Install, lead tech fill out DHA from on arrival, 2C Power Upgrade indoor install arrived on site log in with T-mobile and do a site work through before starting (pre-Photos) take log book & site ID. Calls Ericsson Nic provide information before Per-check {Name, site ID, AMS Tool token #} Start inventory on all small parts (Router SFP, SD card for DUG & Fiber SFP‘s for all technology, then the MU6000 units,) Prep for the power run for indoor lug and crimp power cables, fiber paper the rack for power run, install ground cable to MGB & from SPD cans.

Mount the 6000 units, {GSM, LTE, PCS} run power to the units mount DF-OVP case & ground all the units to MGB. lead will call Ericsson NIC , to inform them the site will be brought down and what technology is brought down {Service impacted window} { soft lock by site NIC ,in the maintenance window } I’ll help my installer pull power cable in to place .Power down the PBC 6500 ,(power battery backup system )& remove the Five AC-cob units, five PSU, two DOU, two BFU. Help the install terminate leads to the PBC 6500 & SPD cans & grounds .Power the PBC 6500 and all newly installed technology. Call Ericsson NIC give name & site ID to network support to bring the all technology back on air, conform that all technology are on air & taken traffic, no issue & Alarm Free Cleanup take post install photos , sign log book out , log out with t-mobile war room. Ericsson quality Check list; take Site Post Photos for COP.

Night 2: Integration lead tech fill out DHA from on arrival, 2C Migration indoor install arrived on site log in with T-mobile and do a site work through before starting (pre-Photos) take log book & site ID as will., I call Ericsson Nic to find who will be my tech support for the night give them my call back information & start by Log in to the E_node_B, scratch load, the node and reload it. With a Basic package and any upgrade packages given on AWS/UMTS or PCS,

Load the site configuration s, then hand off Ericsson NIC, then starts loading the IDB for GSM/DUG on to the SD card. and hand over to the NIC , load LTE and have a ping tested by T-mobile switch .once the site is complete screen shots are taken for COP After tower crew arrived and move the jumpers over to the New AIR Antennas. I then do my call test on all three sectors and technology& E911.

ATT / Parsons South Georgia

Lead Field Technician UMST/LTE

6/1/13-12/15/13(7 months)

Umts /swap out version 4 CBU card in UMTS 3rd carrier, Arrived on site log in with Pack Bridge and verity pre-existing alarms. Then retrieve IP address from the E_node_B and log in with E_mass and continuo by taking screen shots of alarms, CV, & old version of CBU.

Then do a back up of the C/D file screen shots FTP with on errors .Then call the NIC to soft lock the site for the CBU swap. Power down the CBU board, and swap the card out and put new card in and power the unit up. Once in the corrective state then call the NIC to bring the site back up. Log back in to E-mass and do post check and screenshots

.4G LTE Integration

Experience (ALU -7705-SAR-f routers, Ciena routes, Cisco routers MWR-2941

Experience (Andrews LMUs, Geometrix /Grayson LMUs, True pros ion LMUs, Ray-cap LMUs Log in to the E_node_B, scratch load, the node and reload it. With a Basic package & upgrade packages given , set the IP and set-clock, reboot the E_node_B. Continue with the Integration with RBS software and executing the upgrade packages and create CVs for each then setting to star table’s cycle down the E_node_B. within the RBS software. Continued the integration loading the (site-install /RBS-equipment/site-Basic.)

Call the NIC and tell them they can load LKF files.NIC will call back and will say to go ahead and do the data test. Trouble shoots fiber/SFP and RRU Connectivity issue and RAN implementation. Call testing experience with TEMs devices for LTE

Sprint /Bruises Jacksonville FL

Hot-side EVDO /CDMA/iDEN

Lead Field Technician

01/1/13-5/15/13 (4 months)

Arrived on site & coordinate with IM on were the location of the preexisting Equipment is going to be placed , verified that RF jumpers are prepped with new connectors are being used.cat 5 cable is ready to be pulled as well as power. During the maintenance window, call the NIC to log in and check for existing alarms. The record T1 in the EVDO cabinet and at the opposite end photo’s taken, Connect to vortex then check and take screen shots of pre/post of‘T1, Backhaul, call traffic, and then call the NIC to lock down the site. Once the nic locks the site, I then power down the CDMA equipment by shut the correct breakers to continue with the hot slide, Once the CDMA cabinet is placed in to the right location by GC then all cat 5 & power are terminated. Powers is restored and wait for the CDMA equipment to come up then call the NIC to blossom the site to its corrective state then open vortex and take screen shots once the site is up.

Then start the Call testing of each sector with help from the NIC. Locking each sector one at a time. Drive test with a UE device (Air Card) EVDO DATA Speed test for Upload & down load speeds via speedtest.net. Also used Android phone in debug mode for voice. PN channels, TX RX power and RSSI values. Collected screenshots for close out packages. Call testing experience with TEMs devices for LTE & LLDM by LG

Sprint Atlanta GA, Ericsson

4G LTE Integration / SP-210/310 Integration.

New build site

Lead Field Technician

06/01/12-12/09/12 (7 months)

Arrived on site do a walkthrough of the site then call the war room and state my activity and any issues. ‘Back hauls “Check the Ciena for power and fiber connectivity at both ports if done.

4G SP210/310 – Integration

  Experience in router installation at cell sites.  Specific experience with Ericsson MINI LINK SP210, to include on-site scripting and configuration using MINI LINK Craft Software (v1.6).

2.  Familiar with SPRINT installation best-practices, including DC Power, Signal Cable installation, Log in to Craft, SP- 210/310 and load upgrade package, then scripts, do a post check on the SP210 and show commands, then call IPBBC team to see connectivity. No connectivity, trouble shoot,

4G LTE Integration

Familiar with SPRINT installation best-practices, including DC Power, Signal Cable installation, Equipment configuration via console cable and/or remote session access (PUTTY Terminal Software).Familiar with Fiber Optic cable handling and installation, including use of Clatsop-S Type-A (Blue Tape) cleaning Cassette. Experience reading and interpreting SPRINT TED and SID documents. Have and properly use standard telecom hand tools (screwdrivers, pliers, cutters, torx drivers, small wrenches, VOM, etc.); and crimping tool capable of crimping AWG #6 barrel compression lugs .Have and properly use laptop computer outfitted with MS-Office software, Remote Access Terminal software, console cable (USB to Serial).  Have and properly use digital camera to provide standard format JPG images, 7.1 MP, sized to 1024x768.  All photos to include date/time stamp.  Experience with fabricating and testing, on site, Cat6 cables, both straight and cross-over, and assembly of loopback plugs.

 Appropriately skilled technicians will generally have two years or more recent/current experience installing and configuring FIBER OPTIC equipment and cables, along with a solid background in CAT6 cable fabrication and testing at the installation site.

Configuration experience would include time spent doing manual configuration of baseline scripts on high capacity routers and switches in the telecom environment.

Experience in the SPRINT network world would be a definite plus for this one. 

Log in to the E_node_B, scratch load, the node and reload it. With a Basic package and any upgrade packages, set the IP and set-clock, reboot the E_node_B. Continue with the Integration with RBS software and executing the upgrade packages and create CVs for each then setting to star table’s cycle down the E_node_B. within the RBS software. Continued the integration loading the (site-install /RBS-equipment/site-Basic.)

Call the NIC and tell them they can load LKF files.NIC will call back and will say to go ahead and do the data test. Trouble shoots fiber/SFP and RRU Connectivity issue and RAN implementation. Drive test with a UE device (Air Card) EVDO DATA Speed test for Upload & down load speeds via speedtest.net. Also used Android phone in debug mode for voice. PN channels, TX RX power and RSSI values. Collected screenshots for close out packages

Call testing experience with TEMs devices for LTE & LLDM by LG

Metro-pcs / Net versant

Atlanta GA

4G LTE Install 6102 cabinet/ Integration DUL/ SIU/

Lead Field Technician

01/25/11-05/23/11 (5 months)

Arrived on site sign in the log in to ASM Tool and war room after walk through , state any issue, when received delivery of the equipment inspected on receiving it , go over customers Site drawing and location of install. Mount the cabinet pull power cables from the D-Square and terminate power to the E_node_B. Check voltage, and log reading, configure the PDU switches install the heater fans and terminate power set temp. Connect the cable to the OVP and Dull and SIU, Dress in the cables take all photo of the serial numbers Complete the Install by doing a ‘COP Close Out Package ‘. Completed update the war room on the status of the site.

4G SIU Integration

Log in to SIU with Telnet and do a “rest to factory sitting”, and start with .tar file, then get my alarms list and check the T1 backhaul and proceed with a ping test, and record SIU configuration in log. Log time and Continued with the Integration, AS PER MOP.

4G LTE Integration Log in to the E_node_B, scratch load, the node and reload it. With a Basic package and any upgrade packages, set the ip and clock, reboot the E_node_B. Continue with the Integration with RBS software and executing the upgrade packages and creating CVs then setting to star table’s cycle down the E_node_B with in the RBS software. Continued integration loading the site-install /RBS-equipment/site-Basic.

Call the NIC and tell them the site is at 78% and can load LKF files. NIC will call back and will say to go ahead and do the data test. Lock each sector and do a speed test for each sector and record the reading or screen shoots .create a COP for Integration for that site. Trouble shoots SFPs and RRU Connectivity issue and RAN implementation. Drive test with a UE device (Air Card) EVDO DATA Speed test for Upload & down load speeds via speedtest.net. Also used Android phone in debug mode for voice. PN channels, TX RX power and RSSI values. Collected screenshots for close out packages. Call testing experience with TEMs devices for LTE & LLDM by LG

Metro-pcs /Tampa Fl

EVDO Same Contract

Lead Field Technician

Install radios in to cabinet, configure cable connection, relocate heating system in cabinet and then run power to EVDO radios and connect fiber to DOM Power up equipment, log in to the DOM with Vortex, and start Integration DOM as per mop. NIC will call back and will say to go ahead and do the data test. Lock each sector and do a speed test for each sector and) EVDO DATA Speed test for Upload & down load speeds via speedtest.net. Also used Android phone in debug mode for voice. PN channels, TX RX power and RSSI values. Collected screenshots for close out packages.

.

METRO PCS / Net versant

LTE/EVDO

Atlanta Ga /Tampa FL

8/11/10-12/9/10 (5 months)

Lead Field Technician

One month - Install ion of 6601 Ericson LTE cabinets. Install cabinet bolt down and toque cabinet

Terminate power and run cat 5 cables to SIU label cables then take pictures and fill out the

Ericson check list and e-mail paper work to STL on site.

Arrived on site take per photos and call the nic for pre-checks if there no issue with site then

Start install all WCDMA radios and run the fiber and power and RX cables, install breaker panels for the equipment run all the cables and terminate all cables. . Call testing experience with TEMs devices for LTE

Metro PCS 4G LTE

Atlanta GA

Lead Field Technician

1/9/10 -8/1/10 (8 months)

3 sector /6 sector integration

Received delivery for LTE cabinet, set cabinet location by site drawing and mount cabinet,

Run power cable from the D square with the a set of breaker given, correct amps,

Then run the transport from the D mark, teleco box, and the west- tell box.

Prepped, then configure the PDU’s connect transport cable to OVP, check the GPS cable,

Power up cabinet, then scratch load the SUI set the clock, and IP.

DUL scratch load the DUL the LOAD the GIVEN, software by your PM.

Then continue with test calls with speed test soft ware, record the VWARS. Then create the close out package. This includes product data, alarms list, set of photo of equipment, and serial numbers of the equipment, and area photo’s. . Call testing experience with TEMs devices for LTE

US Cellar / Ericsson

Oklahoma ok

Lead Field Technician

9/17/09 -12/20/09 (2 weeks)

Two weeks for clean-up project for Ericson, scope of work fix RF jumpers. Labels, create new cop’s for each site, work form RF jumper to run - off the side of the rack not between the runs of the rack, fiber paper and zip ties to from the jumpers in to place check ground on hard lines, label front and back panel of the rectifier and let equipment, take photos of the shelter and the location of the equipment, the positions of the breakers and photo’s of the amps the breakers are.

Photos of the SIAD equipment and fiber labeled to/from

ATT wireless / Squan constructions

Site Audit /survey GSM/UMTS

Tri- state NY NY

Lead Field Technician

6/21 /09 -9/1/09 (4 months)

Experience with New site build/Site survey/audit, photo lists, Andrews / Ericsson  

Antennas, TMA, RRUS/ RUS01/RRUW/RRU/ HYBRID and Fiber/tower inventories

True-plus Range finder  / Survey location of the site, entrance of site, verify if its access is 24 hrs, refer to site information given and take notes of any changes or damages to property or equipment, Take photos, 1.log in to site log book then fill out the paper work starting with the D square picture of it, make, model, phase, max watts, number of used single, duel and triple breakers. Log all ATT wireless equipment in to a spread sheet, and copious photo of all equipment, serial numbers, cabinets, cards .

Wireless ATT/Am-Track

Philadelphia, PA

Lead Field Technician

1/14/09-6/8/09 (6 months)

Emergency on Call for T 1 lines in PA for ATT.

Extend a T1 line cat 5 cat 6 cable . and speed test existing lines on site.

T –mobile / Triad group

Philadelphia Pa

Central Office In stallion Technician

6/18/08-12/20/08

Responsible for the safety of five installers. A storage unit and company vehicle and inventory of small parts, 25 pair-cable, battery’s and cabinets for all 160 installs in the Philly market

Install cabinet or racks to wall or post. Roof top or basement Power up cabinet, ground, install batteries ,terminate wires ,ground and terminate 110 block, install west tell ,power, ground wire west tell , install NIU cards, configure jumpers on NIU cards

Run 25 pair cable terminate to siemen jack in a sprint/t-mobile/Nextel/AT&T shelter

Run cat 5 cables terminate with RJ-45, Test and label T1s with new circuits -IDs.

AT&T /Gonzalez ,

Central Office In stallion Technician

Kansas City

3/25/08-6/10/08

Inventor All Equipment install bay / Telco rack, Alcatel ARAM_D /D-slam , Run Ground Cable terminate to MGB , Run power cable terminate to BDFB, Data Cable , Fiber Cables

AT&T / Nokia GSN s
Central Office In stallion Technician

Philadelphia Pa

11/18/07-3/10/08

Inventory all equipment , Nokia Siemens Network GSN’s Cabinets and small parts, Card, Power cable, Fiber Cables, Cat 5 Cable, Install un-strut , Install Six GSN A/B Cabinets On to a raised Floor ,Drill holes in to concrete mount Primary uni-strut, Install Secondary uni-strut to Raised Floor , Mount GSN cabinets, Run Ground cable Cut ,Lug, Crimp Ground cable lacey down , terminal to MGB, Install card, Run Power cable, form lacey down power/ data Cable to rack. Cut, Lug ,Crimp power cable to GSN Cabinet, and from the BDFB side for turn up Date .

AT&T /Triad Group,

Boston MA

Central Office In stallion Technician

8/20/07 - 11/1/07

Install Auxiliary Frames for fiber management system, Drilled Holes in Raised Floors mount flanges ,poles, pipe caps, Ox-bar, Fiber cable management. Installed top support for the network bay frame. Toll Rack, Relay Rack, Rack & stack.

Clear wire /

Central Office In stallion Technician

Philadelphia Pa

6/23/07- 8/08/07

Fiber Testing Velcro mocks cable down to rack form & dress fiber cable with Velcro down the side of “RACK” in to patch panels . Test Fiber Reading 95bpms/101bpms passing label fiber with Circuit ID

Comcast Hub /LODOS

Philadelphia PA

Central Office In stallion Technician

4/18/07 -6/1//07

Received Inventor & check Run cat 5 Data Cable on to cable rack , install Router, DACS, Muxes, DMX panels ,DSX panels ,LGX panels, C-4 combiners, 4-way combiners, 8-way combiners

Verizon/CTDI

Philadelphia Pa

Central Office In stallion Technician

11/19/06-4/1/07

Install Auxiliary frames for power cable & fiber rack, data cables , ground cable , Measure the lug, cut, crimp, H- Tap, Inline Fuses, heat shrink, tone out power cable , P- tag power cable .Mount Relay Racks , Fiber Ducts, ADC patch panels . tell-labs Equipment , NG3s, Flash-wavexxx-xxx-xxxx series

Verizon/ Tyco

Philadelphia Pa

Central Office In stallion Technician

8/23/06- 11/2/06