Strong knowledge in wireless platforms: Wi-Fi, Bluetooth, GSM (EDGE, EGPRS), TDMA, CDMA, UMTS, WIMAX and Transmitter/ Receiver methodology.

EXPERIENCE

Product Design Engineer, US Electronics 04/14-Current
U.S Electronics is a leading company in the medical product design

Working with all organization area engineering, sales, marketing etc. to maximize profitability of an existing/new product.
Technology solutions and recommendation up on customer request.
Leading solutions for an EOL products, working closely with the engineering team and vendors for suitable solutions.
Develop, design and assembly prototypes throughout all stages of a new product. Documentation,, technical assistance to the design team, design verification, helping with writing tests plans, test set up, analyze tests results, make sure product are in high quality and up to company standards.
Customer relationship. Leading any issues, failures that are coming back from our customer, leading failures investigations and writing tests reports and conclusions to avoid any future failures.
Leading all EMC/EMI certifications testing of the company products include FCC, EN, UL, CE and more. Troubleshoot for any compliance failures, if products fail RE, RI etc.
Leading environmental and safety testing.
Lead the necessary engineering support to manufacturing, failure analysis, test support, alternate EOL component.
Support transition of products from engineering to manufacturing by providing documentations and any assistance needed, training, EOL status

Lead RF/Wireless Engineer, Etherios wireless design solution 10/13-04/14
Etherios is a leading company in the wireless design solution and services.

Board/schematic design, develop and layout design
Recommendation for improvement in order to meet client goals.
Customer proposal for new/improved design. Block diagram and specification reports
Lab testing- Rx sensitivity, Tx power.
Regulatory certification expert- testing for pre scans (RE, CE etc.) in order to meet EMC/EMI/UL/ETL (safety/environmental) standards (include medical products).
Antenna tuning and matching.
Deep knowledge in test equipment such as CMU200, CMW500, Spectrum, Network analyzer and more.
Deep experience in receiving products with electrical schematic and troubleshoot them for any problem the client is facing.
Create EMC/EMI testing profiles for products based on desire regions it will be marketing.
Design new and improved existing medical products, digital, RF and analog design.
Work with RF/wireless products, programmable devices, microprocessor.

Sr. RF/EMC Engineer, TUV SUD America 06/12-10/13
TUV SUD is a worldwide leading company in the EMC/EMI Environmental and Safety industry.

Performed EMC/EMI testing to all standards: FCC, EN 55022/55011/61326/55012 etc. Korean, BSMI, ICES003, VCCI for Emission and 61326-4-2/3/4/5/6/8/11 for Immunity and Emission.
Focused on FCC wireless standards Part 15 Subpart C (Intentional).
Applied improvements in order to achieve margin levels following troubleshooting on the EUT’s.
Worked with R&S CMU200 and CMW500 and other lab testing equipment.
Writing and reviewing EMC/EMI reports.

Sr. RF Engineer, Rockwell Collins 11/09-06/12
Rockwell Collins is a communication and aviation electronic solutions at the military and for commercial side.

Debugging RF boards with RF equipment such as Network Analyzer, Spectrum Analyzer and Signal Generator.
Filter matching.
System/ boards trouble shooting and testing.
Board design with discrete components such as Transistors, Diodes etc.

Chief of Staff-R&D Radio Frequency (RF) Engineer, Optiway Integrated Solution 11/07-8/09
Optiway is a startup company that develops repeaters for cellular companies (CDMA, GSM900, GSM1800, and UMTS) and WIMAX networks.

Planned and developed all the RF circuits (Low noise) up to 3 GHz, PCB layout and cards for all systems (repeaters combined with fiber-optics) from conception through implementation, boards designs includes discrete components such as Transistors, Diodes etc.
Performed network and system optimization according to client specifications.
Oversaw vendor compliance on various projects; collaborated with interdisciplinary team including mechanical engineer designers and sales representative to ensure project efficiency.
Used RF test equipment for testing and debugging of electronic cards and system troubleshooting using equipment such as the spectrum analyzer, signal generator, network analyzer, power meters, and oscilloscopes. Performed gain and noise analysis and other RF characteristics.
Managed, taught and guided 3 team members; managerial responsibilities included creating work schedules as well as involvement in board meetings. Designed company’s official documents such as ATP, ATR and ECO.

Research and Development RF Engineer, Tadiran Electronic Systems Ltd. 1/04-11/07
Tadiran produces receivers and transmitters for the military.

Designed low-noise receiver and transmitter boards, VCO’s, PLL circuits and analog boards, all designs includes discrete components such as Transistors, diodes etc.. Performed noise analysis. Tested cascade gain and other RF characteristics (NF, P1dB, IP3 etc.).
Performed boards debugging and troubleshooting. Determined sources of external and internal intermodulation issues. Analyzed and mitigated any and all 6GHz interference issues.
Coordinated equipment delivery schedules and project management involved in the forced frequency re-banding, on-off testing with other carriers, and antenna swaps.

EDUCATION/TRAINING

Bachelor of Electronics Engineering – Afeka College of Engineering, Tel-Aviv Israel
Associate Degree – Electronic Technician, Tel-Aviv University
Military Service, Israeli Defense Force: Served in Israel's naval Special Forces. 7/95-10/00

*Fluent in written and spoken English, Hebrew.