 H2S
 Fall Protection
 STOP
• Coordinated & oversaw well program operations with drilling contractors,
company & client
• Implemented QHSE Management and Company Standards and Procedures
• Plan short and mid term operations, overseeing material requests/orders orders are issued
• Supervise the execution of the Drilling Program
• Responsible for compliance with safety compliance • Prepare daily drilling report and info from the wellsite
• Monitor daily costs and prepare daily cost estimates for expenditures on the
wellsite
• Monitor Non- Productive times and implement corrections as needed. Monitor well AFE
• Oversaw running of casing, cementing & other jobs
OBjECTivE
Dedicated professional with 13+ years of progressive oilfield experience- willing to travel. Results oriented individual with a proven record of
consistency.
SkiLLS SuMMAR y
EMPLO yMEnT HiSTOR y

Chesapeake Energy (2014-4/2015)
Wellsite Supervisor/Company Man
Drillright Technology (2013-2014)
Lead Directional Driller
Sandridge Energy (2011-2013)
Wellsite Supervisor/Company Man
k elford Energy LLC (2011-2011)
Lead Directional Driller
Halliburton Directional Drilling (2010-2011)
Directional driller
Victor cooper
1215 Madeleine Ct.  Greenwood, Ar. 72936  xxx-xxx-xxxx  xx@xx.com
• Managed directional drilling tools at the well site
• Drills deviated and straight hole sections, make corrections as needed
• Located field failures and assisted in tool failures
• Worked with clients directly and notified of unusual conditions during job
• Ensured service is maintained; filed needed reports daily
• Designs well plans prior to job, and updated as needed • Implemented training for job responsibilities
• Selected and over saw preparation of drilling equipment
• Prepared end-of-well report
• Stayed up to date on personnel, quality System and health, safety and
environment standards and procedures
• Coordinated & oversaw well program operations with drilling contractors,
company & client
• Implemented QHSE Management and Company Standards and Procedures
• Plan short and mid term operations, overseeing material requests/orders
orders are issued
• Supervise the execution of the Drilling Program
• Responsible for compliance with safety compliance •
Prepare daily drilling report and info from the wellsite
• Monitor daily costs and prepare daily cost estimates for expenditures on the
wellsite
• Monitor Non- Productive times and implement corrections as needed.
Monitor well AFE
• Oversaw running of casing, cementing & other jobs
• Drills deviated and straight hole sections, make corrections as needed
• Located field failures and assisted in tool failures
• Worked with clients directly and notified of unusual conditions during job
• Ensured service is maintained; filed needed reports daily
• Designs well plans prior to job, and updated as needed • Implemented training for job responsibilities
• Selected and over saw preparation of drilling equipment
• Prepared end-of-well report
• Stayed up to date on personnel, quality system and health, safety and
environment standards and procedures
• At Halliburton I learned the necessary skills to sucessfully drill a directional well.
• Managed directional drilling tools at the well site
• Drills deviated and straight hole sections, make corrections as needed
• Located field failures and assisted in tool failures
• Worked with clients directly and notified of unusual conditions during job
• Ensured service is maintained; filed needed reports daily • Designs well plans prior to job, and updated as needed
• Implemented training for job responsibilities
• Selected and over saw preparation of drilling equipment
• Prepared end-of-well report
• Stayed up to date on personnel, quality system and health, safety and
environment standards and procedures

Victor Cooper  1215 Madeleine Ct.  Greenwood, Ar. 72936  xxx-xxx-xxxx  xx@xx.com
PAGE 2 OF 2

Lariat Drilling (2009-2010)
Driller
Drilling 9500’ extended reach horizontal wells for oil in western Oklahoma. This is a highly problematic area for lost circulation. As the driller I have to keep constant
watch on our flows and pit levels to make sure were not taking a kick or any lost circulation problems. These wells are drilled 100% with a low viscous low weight mud
as to reduce downhole pressure for lost circulation. My rig is the top producer in the area.
union Drilling (2008-2008)
Driller
Same basic job description as above. We was drilling 7000’ gas wells with 100% air. Spudding with a 12.75” hammer tool and TD the well with a 8.75” hammer tool
running 9 5/8 production casing. I have knowledge on drilling with air and all things involved with it as far as when to run the booster, various mist pumps and soaps
involved with mist drilling. How to diagnose problems associated with the drilling of the wellbore with air and tools associated with this practice.

Goober Drilling (2007-2007)
Driller
Same basic job description as above. We was drilling extended reach horizontal wells in the Barnett Shale.
vaquero Drilling (2006-2007)
Driller
Same basic job skills as above. This rig was a Schramm super single. We was drilling shallow oil wells in Andrews,Tx. The responsibilities of this rig were the same as
above except we was drilling with a salt brine. We had several earth pits where we had to keep the salt brine and fresh water seperated and this was very important that
we had fresh water when we needed it. H2S was a very real threat here so I had to make sure all our monitors and breathing apparatus was checked and operational.
union Drilling (2002-2006)
Derrickman

We was drilling methane bed coal seam wells. Spudded the well with 12 ¾ hammer tool to 2400’ to set surface pipe. Drilled up to kick off point with air. As the
derrickman I had the responsibility of the upkeep of the compressors, booster, mist pump, and anything related to the air or fluid drilling of the well.
EDuCATiOn
keota High School – Keota, Ok 4.0 Gpa/Graduated with Honors
Army national Guard – Honorable Discharge (4/2000 - 4/2008)
19D Cavalry Scout. Deployed in Support of Operation Enduring Freedom.
REFEREnCES
Raymond n ew
(Chesapeake Energy- Drilling Superintendent)
xxx-xxx-xxxx
Zach Scott
(Chesapeake Energy - Drilling Engineer
xxx-xxx-xxxx
Mauricio Zarabia
(Chesapeake Energy - Drilling Consultant
xxx-xxx-xxxx
• Knowledge of any and all jobs on the rig in order to instruct others, and to fill
in as needed.
• I trained my crew, and introduced procedures to make drilling operations more safe and effective
• Observed pressure gauges and moves throttles and levers in order to control the speed of rotary tables, and to regulate pressure of tools at bottoms of
boreholes.
• Counts sections of drill string in order to determine depths of boreholes. • Controlled levers and brake pedals in order to control fuel and raise drill pipes
and casings in and out of wells.
• Maintains records of footage drilled, location and nature of strata penetrated, materials and tools used, services rendered, and time required.
• Oversaw operation of mud pumps ensure circulation and consistency of drilling fluid or mud in well.
• Located and recovered lost or broken bits, casings and drill pipes from wells using special tools.
• Responsible for work performed on upper rig structure, which includes setting and securing the crown block and stringing cables through sheaves
and blocks.
• Examined and regulated the operation of mud pumps to ensure proper circulation and consistency of drilling mud.
• Monitored entire mud system and analyzes mud; carries 100 pound mud sacks from storage to hopper and mixes in hopper to achieve appropriate
consistency.
• Climbedon upper rig structure, and ensures fall protection requirements are followed.
• Worked on derrick board during tripping, as well as in tandem with Motorman, Floorhand and Driller; latches and unlatches elevators while hoisting and going in the hole with drill pipe; works in tandem with rig and
casing crews while running casing.
• Operateed boom line, air hoist, and cat line to lift and move heavy supplies, equipment, and pipe.
• Performs routine and preventative rig servicing, repair, and maintenance; cleans and paints rig structure when work specific to the derrick board is not
required.
• Assisted in dismantling and erecting the rig structure and associated drilling systems.