DISTINCTIONS

Have Military training and certification in Fiber optics and Telecommunications

Good attitude towards customers

QUALIFICATIONS

Strong communications skills.

Wide range of product knowledge and application of services.

Secret Clearance Level

NCCER Basic Rigger Cert

NCCER Qualified Rigger Cert

NCCER Signal Persons Cert

Cadweld Certified

AT&T 2C LTE Upgrades

WNG, WIRELESS NETWORK GROUP NOVEMBER 30, 2015 – CURRENT

AT&T Maintenance

700, 1900, 2300 RRH replacements, antenna swaps, trunk fiber replacements, power trunk replacements, SFP card replacements, sector fiber replacements, sector power replacements, jumper replacements, Anritsu line sweeps, antenna PIM, fiber scopes, tests and cleaning, voltmeter tests.

SPRINT NETWORK VISION & 2.5 Maintenance

800, 1900 RRH replacements, 2.5 RRH replacement, antenna swaps, HYBRFLEX replacements, SFP card replacements, sector fiber replacements, sector power replacements, jumper replacements, Anritsu line sweeps, antenna PIM fiber scopes, tests and cleaning, voltmeter tests

CLEARWIRE MICROWAVE

Anritsu line sweeps, ODU replacements, voltmeter tests, dish spray with anti-freeze spray

TPS WIRING SOLUTIONS OCT 5, 2015 – NOVEMBER 30, 2015

AT&T 2C NORTH CAROLINA, TEXAS, LOUISIANA, TENNESSEE MARKETS

Boom and platform swaps and upgrades, antenna drop and swap, radio add, fiber and power runs, jumper add and replace.

GLOTEL INC JULY 9, 2015 – OCT 2015

AT&T 2C

- Antenna drop and swap, radio head add, run and support jumpers, run sector power and fiber in new new liquidtite, support new liquidtite, wire power and fiber into squid, downtilt and plumb photos, set antenna azimuths, sweep and pin antennas, configure ret cables for pre nd post ccu reports and final configuration, final photos

AT&T 3C

- Drop and swap 1900 GSM antenna with new 8 port 1900 GSM antenna, run liquidtite from new DC12 to sectors, Mount new radio heads, pull power and fiber from DC12 to new radio heads, wire power and fiber into new radio heads and DC12, support liquidtite runs, route and support jumpers, configure rets for president and post ccu reports then for final configuration, remove unused diplexars for old GSM antenna and connect them to the diplexars for the existing 850/1900 UMTS/GSM antenna, pull power from DC12 to the cabinet and wire into raycap, pull fiber into raycap cabinet the. Into the 9412 percell cabinet, wire raycap and 9412 to power sectors, take all antenna azimuths, sweep and pim new antennas, final photos

SPRINT NETWORK VISION AND 2.5 NEW. BUILD

Fly up and mount handrail kit for existing monopole platform, sweep and pim new antennas, fly and mount new antennas, 800 and 1900 radio heads, route and support jumpers from antenna to radio heads, run new ret cables from notch filter to 800 radio head and from notch filter to antenna, run ret from 1900 radio head to antenna, support rets, fly and route 3 new hyberflex lines to sectors, wire power and fiber from hyberflex lines into 800 and 1900 radios, support power and fiber and spare power and fibers on side of radio heads, color code jumpers, power and fiber, antenna azimuths, snap in hyberflex lines down the tower, run lines into shelter to the distribution box, run lines into box and wire into breakers and fiber tray, Mount new GPS and run 1/2 inch coax line into shelter to GPS cabinet, final photos

2.5

Build out antenna and radio head onto maspipe, hook up jumpers from antenna to radio head, support jumpers, fly and mount antennas and radios, fly and support 5/8s inch new hyberflex line, connect existing power from NV sectors to power up the 2.5 new radio heads if power is not included in new hyberflex line up tower, connect fibers from the 1/2 inch hyberflex fiber jumper to radio head, route and support said jumper to main hyberflex line, connect to Medusa head on new hyberflex line running down the tower, run and support 2.5 hyberflex line into shelter then into distribution box, wire power and fiber into existing breakers and fiber tray, if necessary add 3 new breakers for power for 2.5 lines to power radio heads.

TXR GLOBAL SERVICES INC. JANUARY 5, 2015 - APRIL 1, 2015

T-mobile 700 LTE Upgrades

- Drop and swap old air antenna for new LTE air antenna or Andrews model antenna

- Run and support jumpers from new antenna to new radio head

- Sweep and PIM new jumpers

- Add new 700 radio head

- Run fiber and from radio head to. squid at the existing hyperflex line.

- Test fibers

- Wire existing spare power into radio head

- Ground radio head and support ground cable

- Support power and fiber using snap ins and gromets

- support grounds using velcro

- Install new cable tray on roof tops when necessary

AT&T 1C

- Drop and swap antennas, replace with Andrews LTE model antenna

- Add new 700 radio head and DC2 on H-Frame built with unistrut

- Route and support jumpers from antenna to radio head

- Sweep and PIM jumpers

- Run and support sealtight with power and fiber from radio heads on all sectors to sqiud and wire in power and connect fibers in slots 1 5 9

- Fly 2 new DC power trunks and fiber trunk up tower

- Wire and connect DC power trunks and fibers into squid

- Run and supprt DC power trunks and fiber trunk along ice bridge to shelter

- install junction box for DC power trunks service loops

- Ground DC power trunks before shelter boots leading into shelter/cabinet

- Install fiber slack box before cabinet

- Coil excess fiber into fiber slack box

- Run trunk cables and fiber trunk into shelter and. run along cable rtra and support with wax string and fiber paper before wiring into cabinet

CAELO COMMUNICATIONS JANUARY 27, 2014 – DECEMBER 19, 2014

ALU Tiger Team

Full Nextel Decomm to include boom gates, monopole platforms, all antennas, jumpers, grounding, ground bars, 7/8 in and 1 5/8 in hardlines, shelter racks and shelter.

AT&T 1C new builds to include adding new platforms on monopole.

AT&T 2C upgrades.

AT&T Tiger Team on existing 1C builds and 2C upgrades.

Site walk and 360 degree pre pics for future microwave site.

Verizon LTE build to include new platform on monopole and new boom gates on self support and gyed towers.

Sprint 2.5 new builds.

Sprint 2.5 Tiger Team.

Working Knowledge of Anritsu line sweep gear. (not certified)

Fiber Testing and Scoping for AT&T 1C, 2C, Verizon, and Sprint 2.5 builds.

NEXIUS FUSION AUGUST 24, 2013 – DECEMBER 5, 2013

AT&T LTE new builds and upgrades

AT&T LTE trouble shooting and tiger team work

AT&T LTE Like for Like ( UMTS & CDMA upgrades to LTE )

AT&T Coax Solutions Sites

Gravitec Competent Climber and Rescue

Kaelus PIM Certified

Experience with the JDSU T-BERD 2000 Fiber Tester (Not Certified)

MASTEC NETWORK SOLUTIONS SEPTEMBER 4, 2012 – AUGUST 1, 2013

Working knowledge of Acatel Lucent/Sprint 4G LTE and Microwave Technologies since 10/2012

Flown and mounted hypr flex cables, 800 and 1900 RRH’s, and antennas for Acatel Lucent/Sprint

Wired RRH’s with power and multimode fiber for CDMA and CDMA LTE

Connected and weatherproofed coax jumpers from antenna to RRH’s

Can read wiring diagrams

Can read site plans

Working knowledge of Bechtel and AT&T 1C 4G LTE Technology since 04/2013

Rigging Experience

Capstan hoist (cat head) experience

Flown and mounted boom gates

Kaelus PIM certified

Bechtel Passport

Tower Rescue

DOT

OSHA 10

AT&T ask yourself Certification

First aid and CPR certified

PROFESSIONAL EXPERIENCE (AIT Training at Fort Gordon, Ga.)
United States Army Reserves
JANUARY-MARCH 2009
CABLE INSTALLATION AND SERVICE Oct 4, 2008 through Oct 4, 2014

Installation of field wire (cat5 and cat6)

Knowledge of the 25 and 100 pair cables (color codes and setup)

Knowledge of commercial fiber optics (splicing, connections of ends, hand polishing ends of new connectors, scoping and testing of single and multi mode fibers, troubleshooting)

Tactical fiber and telephones

Deployed in Kuwait working with cat5, cat6, fiber optics and satellite equipment

HOBBIES

Spending time with my wife and children

Ice Hockey

Snowboarding

Scuba Diving

Hunting

REFERENCES

Mr. Bruce Listxxx-xxx-xxxx- work
Ms. Justine Chemelli                          xxx-xxx-xxxx- work
Mrs. Judy Jonesxxx-xxx-xxxx- work

PROFESSIONAL REFERENCES
Jason Farris xxx-xxx-xxxx- cell
Bryan Adkinsxxx-xxx-xxxx- cell
Shyloh Knightenxxx-xxx-xxxx- cell