Provides necessary interface between drilling, subsea control and completions departments.
Assists in preparing technical inquiries regarding design and installation of mechanical systems.
Adheres to all health, safety and environmental standards.
Immediately reports observed hazards or potentially hazardous conditions to Department Head.
Immediately reports injuries and related incidents to Department Head.
Prepares mechanical design reports for associated projects.
Prepare documentation and orchestrate system integration testing.
03/2012-3/2014 Lloyds Registry Houston, TX
System and Controls Consultant
Provide in house technical support for major oil client
Provide technical support for 6-8 junior surveyors
Travel to various locations for pre well operations as well as coordinating with client and contractors
Perform evaluation of assets and spares for operations
Responsibilities-( Expert Witness Consulting of Subsea Controls Systems. -( Incident Investigation, Regulatory Compliance Audits.-( Expert Witness Consulting of Drilling Controls Systems.
-( Factory Acceptance Test (FAT)-( Electrical Factory Acceptance Test (EFAT)-( System Integration Test, (SIT) Hydraulic, Pneumatic, Mechanical, Electrical.-(
Work safely and ensure client s HSE Policy and Operating Management System (OMS) is followed by persons involved with subsea BOP controls operation and maintenance.-
( Work with client and client s vendors to ensure installation and operability of subsea BOP controls equipment in compliance with client, industry, and legislative requirements.-
( Interface with drilling contractors and vendors on subsea BOP controls maintenance, testing, and modification requirements.-(
Interface with other client internal groups involved in subsea BOP controls requirements (Rig Audit Team, Client-Owned Rig Personnel or Teams).-
( Provide technical support and recommendations in troubleshooting and remediation efforts, as required.-(
Create thorough, accurate, concise and professional client deliverables.-
( Demonstrated Understanding Certification Societies/Enforcement- MODU, ABS, DNV, MMS, ISM, IMO, USCG, NTL
08/2010-03/2012 Granite Services Houston, TX
Service Technician
Service, Installation and Technical Sales of Hydril equipment
Assist Hydril with servicing and installation of mechanical, hydraulic and electrical BOP equipment
Perform system upgrades on CCU systems and related equipment
Troubleshoot and diagnose technical issues with control modes and stack
Assist rig electronics technicians with inspection of stack electronics
Attend advanced learning seminars and classes
Travel locally and internationally for service and installation
Maintain daily service reports and documentation
Maintain log of expenses and job related purchases
Responsible for working offshore and operating subsea equipment such as HPU's, electrical and hydraulic umbilical and control pods.-
Launch and Recovery System Completions-(
Intervention Work Over Control Systems Maintenance-(
System Software-(
Set-up and breakdown of Launch and Recovery System(
Monitor well during installation and completion-
Produce service reports-(
Reading fluid samples using particle method-(
Reading Schematics-(
Shop work-(
Pump rebuild and maintenance-(
Pre-charge Accumulators-(
Electrical continuity and insulation resistance testing-(
Microsoft Office Suite-(
SAP-( Equipment Depot Administrator-(
Responsible for Customer Warehouse Inventory-(
Logistics including shipping, receiving and coordinating customer inventory to and from docks-(
Responsible for movement of all Hydril supplied equipment to preferred customer-(
Responsible for evaluating and interpreting date during and after service activity-(
Maintain storage, tracking, maintenance and security of all equipment, tools, parts and spares-(
Train, motivate and supervise coworkers
3/2009-08/2010 Oceaneering Houston, TX
Rental / Service Technician
Coordinate IWOCS interface with tree and rigs including pressure testing on umbilical reels, subsea trees, and manifolds.
Assemble and maintain HPUs, MAC pumps, and testing equipment
Obtain samples as well as monitor fluid cleanliness levels
Maintain and operate control interface equipment
Assisted the Macondo #252 well kill with Hydrate Remediation
Responsible for assembly manufacture, flushing, startup commissioning and testing of offshore subsea control systems. Shop refurbishment and field installation.-(
Manufacture, testing and installation of wellhead control panels. Responsible for the Factory Acceptance Testing and Systems Integration Testing of new control systems.-(
Lead Controls Technician for the service and installation of offshore Subsea trees and equipment.
8 hours of completed HAZWOPER training and RIGGER training
Able to interpret electrical and hydraulic schematics and as built drawings.
Logged paperwork for vocational related travel expenses, schematics, and scopes.
1/2008 - 1/2009 Aker Solutions MH Inc. Houston, TX
Offshore Hydraulics Technician
As a service technician responsibilities included the ability to trouble-shoot and repair down equipment to ensure the greatest efficiency on-board the rig.
Scope of work includes: derrick drilling machines, lower-guide arms, roughnecks, torque master, tubular feeding machine, mud pumps HPU, stand-builder arms, accumulator and catheads, etc.
Knowledge of directional spool valves as well as our Cyber Chair, IOC and Drill view application software.
International travel is extensive and able to adapt to any condition necessary to complete the assignment.
Completed specialized technical training with all Aker MH equipment.
Worked on 1250 MDDM project in Kristiansand, Norway.
Use schematics and PNi drawings to assemble and diagnose issues on equipment.
Experience with assembly and fabrication hydraulic hoses and tubing.
Maintained and worked on DDM 650, DDM 750, DDM 1000, PTD, HPU, and 1250 MDDM
8/2007 - 12/2007 Tesco Services Inc. Houston, TX
Downhole Tool and Accessory Technician
Repair downhole tools, surface equipment, and other production equipment in support of drilling service division.
Job responsibilities also included the assembly and disassembly of these tools and equipment.
Performed maintenance, installation and repair of accessories and tools in the shop and at various rigs
Installed torque rings and centralizers on 3-1/2, 4-1/2, 5-1/2 and 7-5/8 casing at customer yards and on location at various rigs
Assemble and installation Bore Gauges for crimp size specification
Worked directly with a variety of managers to coordinate daily operations at different rig locations.
2006 - 8/2007 Wenzel Downhole Tools Conroe, TX
Mud Motor Technician
Responsible for tearing down mud motors using torque master.
Responsible for building up Mud Motors using torque master.-
Use Air Tools, Shop tools, and hand tools
Operate and maintain shop forklift
Responsible for promoting safe and clean working environment-
Supported Technicians in equipment maintenance and repair-
Used Hoists and Cranes to lift work pieces to Machine
Experience in maintenance, operations and quality control of shock tools, Jars, mudsavers and mud motors.
Assembly and disassembling of mud motors using the Breakout Unit / Torque Master.
Assembly of bearing packs and CV transmissions.-(
Measure power sections (rotor and stator).-(
Maintained and serviced conventional oil service tool and equipment
Routine inspection on the integrity of the tool necessary for optimal operation.
Knowledge in micrometers, calibers, and thread composition.
Material Handling, Inventory, and Shipping and receiving.
2004 - 2006 Goodyear Houston, TX
Service Manager
Manage the maintenance shop of 8 mechanics and service helpers.
Implement sales and service goals for the shop and local district.
Promote a safety conscious and healthy work environment.
Drive sales and set goals for service department.
Ascertains automotive problems and services by listening to customer's description of symptoms; clarifying description of problems; conducting inspections; taking test drives; checking vehicle maintenance records; examining service schedules.-
Verify the warranty and service contract coverage by examining records and papers; explaining provisions and exclusions.-
Develops estimates by costing materials, supplies, and labor; calculating customer's payment, including deductibles.-
Prepares repair orders (RO) by describing symptoms, problems, and causes discovered, as well as repairs and services required; obtaining approval signatures; entering RO into service database system.-
Maintains customer rapport by explaining estimates and expected return of vehicle; obtaining customer's approval of estimates; obtaining and providing contact telephone numbers; answering questions and concerns; arranging towing and temporary transportation.-
Maintains automotive records by recording problems and corrective actions planned.-
Updates job knowledge by participating in educational opportunities; reading manufacturers' publications.-
Enhances organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments

2003 - 2004 Goodyear East Providence, RI
Service Manager
Manage the maintenance shop of 8 mechanics and service helpers.
Implement sales and service goals for the shop and local district.
- a safety conscious and healthy work environment.
Drive sales and set goals for service department.
Ascertains automotive problems and services by listening to customer's description of symptoms; clarifying description of problems; conducting inspections; taking test drives; checking vehicle maintenance records; examining service schedules.-
Verify the warranty and service contract coverage by examining records and papers; explaining provisions and exclusions.-
Develops estimates by costing materials, supplies, and labor; calculating customer's payment, including deductibles.-
Prepares repair orders (RO) by describing symptoms, problems, and causes discovered, as well as repairs and services required; obtaining approval signatures; entering RO into service database system.-
Maintains customer rapport by explaining estimates and expected return of vehicle; obtaining customer's approval of estimates; obtaining and providing contact telephone numbers; answering questions and concerns; arranging towing and temporary transportation.-
Maintains automotive records by recording problems and corrective actions planned.-
Updates job knowledge by participating in educational opportunities; reading manufacturers' publications.-
Enhances organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments

Training:

1993 - 1996 Electrical Schooling Washington DC
IBEW
Earned a reputation for expertise in complex trouble shooting and problem resolution.
Gained extensive experience in analyzing and following manual, schematic diagrams, and other specifications.
Consistently commended for team player mindset, " doing it right the first time " and working with minimal supervision
Service existing electrical installations, specializing in commercial applications.
Installation of conduit and wiring in new construction, including slab work and exposed conduit.
Terminating wires inside switchgear and electrical panels.
Control wiring for a variety of applications from contactors and time clocks to motor controls and fire suppression systems.
Safely remove and replace existing panels in commercial and residential settings. -
Layout and install electrical for tenant remodels from small to larger office spaces. -
Provide exothermic grounding for main services and cellular site grounding systems. -
Perform physically demanding tasks such as digging trenches for conduit and moving heavy objects.
2000 - 2003 UA Local #529 Waco, Tx
Pipefitter
BTJ Journeyman Pipefitter

Current certifications:
TWIC, Safe Gulf, US Passport, and BOSIET, Well Control

References:
Tige Clawson- Supervisor and Accessories Lead Technician TESCO- xxx-xxx-xxxx
Dan Potts- Service Manager Wenzel Downhole Tools- xxx-xxx-xxxx
Tony White- Supervisor and BOP Technical Specialist Lloyds Register- xxx-xxx-xxxx