Apex Systems March 2015 – October 2015
Site Cleanup Checklist and Closeout
Installation of gps Antennas with surge arrestor, making sure antennas and RRH is properly installed with color code on jumper cables.
Making sure EMS blind Audit is completed in ATLAS; also eliminate all trip hazards where possible and clearly marked.
Making sure lfmc cables, liquid tight is not more than approved length and also insure that slabs and platforms are installed properly.
Installed RF sign insure that surge suppression is installed on all metallic cables entering shelter or buildings.
Insuring weatherproofing has been installed on all exterior coax and fiber connectors.
Making sure that base station have been properly secured/bolted to slabs/building floor or platform.
I have hands on experience using, (Street Atlas, siterra, site master, network analyzer)
Configuration and Troubleshooting of Ericsson Mini-Link TN/PT (microwave links 1+0,
1+1, VLAN, Upgrade of Baseline, LAN, WAN port configuration).Supervision crews Installation RBS 6000 with
DUL for CDMA/LTE technologies with hybrid cable system.
Troubleshooting of RBS6k CDMA/LTE (Tiger Team).Measurement tests (VSWR, DTF, RL), Fiber Test (fiber scope, ODM). RET Motors configuration with RFS Software.
Preparation and delivery of closeout packages to the customer.
Deliver reports to the Team Lead Manager after each projects.

Quadgen Wireless, Pennsylvania May 2012 –Sept2015
RF Drive Test / Data Collection Engineer

4G LTE, 3G, GSM/GPRS/CDMA2000/EVDO/EDGE/UMTS/ Optimization and Site Integration.
Monitoring of KPI's, throughput (Upload & Download speed), call drop rate, handover successful rate as requested by the RF performance team. 

Performing CTTP and making E911 test calls on different sectors on corresponding Azimuth confirming the LAT/LONG.

Analyze drive test data on XCAL, NIMO and JDSU for network analysis, site verification, problem identifications and solutions and generate a report on drop calls, coverage intensity.
Strong troubleshooting skills in configuring of 3G, CDMA, 4G, LTE phones, to the right frequencies 800MHZ, 1900MHZ for a better coverage using QPST software.

Worked directly with RF Engineering Team for optimization of network and to analyze the data collected for EVDO Upload, download speed and ping time testing.

Handling customer complaints and related issues.

Performing Clockwise and Counter-Clockwise drive to verify successful handovers between sectors within a site as well as sanity drive to verify handovers among many sites.

Conduct nationwide drive testing in major cities and highways using Microsoft Street and Trips.
Proficient in office computer applications: Excel, Word, PowerPoint, and Access
Experienced and understanding of XCAL, NIMO, JDSU Street and Trips, Phones,Scanners,
GPS

I have 3 years of experience doing E911 call testing, to ensure the PSAP (Public Safety Answering Point) has received the correct location information.

Experienced and understanding of GPS equipment for 7years to identify longitude and latitude coordinates.

I have hands-on experience using laser range finding equipment, and also know how they work.

Understanding Telecomm Terms.(RSRP/RSCP,SNR,PCI/PSC,IRAT,IFHO,CSFB,VoLTE ETC)

Experienced and Understanding of Nimo outdoor, JDSU kit, Multi-carrier, UE Status, and Kit Setup.

Pinnacle wireless April 2011 – January 2012

Field Technician Engineer

Installation of Antennas, Microwave, Lines, connectors, Diplexers, MHA, TMA, RRU, RF, RRH, Coax, Fiber optics, and Troubleshooting.

Investigated and report back to engineering any interference issues on the network

On-call reporting responsibilities as scheduled by the Field Operations Manager of Lead Field Tech Engineer

Follow up on prospective customer through phone calls and emails.

Last mile Communications. Nigeria June 2002 - 2010

Tower climber Engineer

Installation of micro-wave Antennas

Responded to cell site alarms and dispatches for assigned or on call sites for troubleshooting and network restoral activities

Installed and maintain cell site equipment to company standards and tower constructions.

V-sat installation/networking and configuration of satellite modems.

Maintained and upgraded dell site, microwave, DC power systems, and all other assigned equipment in an efficient and timely manner.

Experience and good Understanding of 802.11a/b/g/n Wi-Fi standards

 Experience with Scale/ Performance/ Diagnostic/ Test Automation tools

Ability to Manage network LAN & Wi-Fi infrastructure changes using demand management tools.

Knowledge and Understanding of wireless industry standards.

 Knowledge of WLAN Radio Technologies
L2/L3 roaming, multicast optimization, mobility group scaling 
Various Spanning Tree methods, Vlan, 802.1q, Link Aggregation, 802.3af, Network Management, DHCP, DNS.

Experience in Remote Gateway Testing on different type of DSLAM, Wireless Access Point Test, IPTV Experience, Wi-Fi chamber.

Achievements/Award:
Best Team Member Award for August 2008 – This was awarded to me following consistency in excellent discharge of assigned duties.

Education & Professional Training

Currently working on my Bachelor of Science in Information Technology, Advanced Networking Certificate (Undergraduate) at University of Phoenix, Arizona, USA.
RF Radiation Safety - Certified, (2012) American National Standards Institute (ANSI).

Imo State University, Nigeria Bachelor Of Science (B.sc)

Hazardous Communications Certified (2012).

Networking and microwave installation certified (2006).

Computer Hardware & Maintenance Certified (2002).

V-sat installation/networking and configuration of satellite modems, Certified (2000).

Tower Climber & Rescue, Certified (GRAVITEC).

OSHA, Certified, (2012).

American Heart Association – First Aid, CPR, AED Certified (2012).

Certified to work on sprint 3G CDMA and 4G LTE by Alcatel Lucent (ALU).