Associate of Applied Science Completion Date: TBA
Instrumentation and Controls Program

San Juan College Farmington, NM
Associate of Applied Science Degree Received May 2013
Industrial Processing Operator Program (IPOP)

San Juan College Farmington, NM
Associate of Applied Science Degree Received May 2007
Pre Medical Science

EDUCATIONAL EXPERIENCE
Educational Training – Instrumentation and Controls Program
January 2014 – May 2014, San Juan College, Farmington, NM
Acquired classroom knowledge, training and computer based laboratory sessions in AC and DC fundamentals; as well as knowledge of the NEC guidelines.

Educational Training – Industrial Process Operator Program
August 2010 – May 2012, San Juan College, Farmington, NM

Acquired classroom knowledge and training in the process control room that includes but not limited to regulatory standards, workplace safety, maintenance process, water treatment/analysis, boiler/turbine generator, and neutralization.

Educational Training – Pre Medical Science
August 2000 – 2007, San Juan College, Farmington, NM
Acquired classroom knowledge of medical terminology, several hours of chemistry laboratory training and computer software use and installation.

WORK HISTORY
Formica Counter top fabricator
March 2016-August 2016, Creative Cabinets, Farmington, NM.
Constructed kitchen and vanity countertops from scratch and applied formica to customer requests.
Prepared, stained and sprayed clear varnish on custom cabinets.
Installed countertops, cabinets and custom woodwork.
Utilized several types of wood working equipment; Table saw, Router, Circular saw, Biscuit joiner, drills, miter saw, laser level, various types of sanders
Drove a delivery cargo truck to deliver countertops and cabinets to customers in the four corners.

Apprentice Lineman
April 2015-October 2015, City of Farmington Electric Utility, Farmington, NM
Performed electrical line construction and/or maintenance consisting of setting and framing poles, stringing conductors, splicing and terminating conductors, hanging and setting transformers and devices, and working on energized conductors and equipment and devices. This work was done both on the pole and off the pole from and aerial device.
Performed work on protective devices.
Installed service drops and meters.
Installed underground conduit and conductors.
Using a winch truck with winch, transported poles and materials, pulled wire, set transformers and poles.
Constructed and maintained substations.
Installed and maintained street lighting, industrial lighting and park lighting.
Worked with trouble man in locating and repairing faults with power lines and related devices.

As outlined by apprenticeship standards, performed maintenance and construction on high and extra high voltage transmission and distribution lines.

Class A Helper/Class B Helper
April 2014-April 2015, City of Farmington Electric Utility, Farmington, NM
Performed electrical line construction &/or maintenance consisting of setting and framing poles, stringing conductors, splicing and terminating conductors, hanging and setting transformers and devices.
Installed underground conduit and conductors.
Helped install service drops and meters.
Operated mobile equipment used in line maintenance and construction.
Used a truck with winch, transported poles and materials, pulled wire, set transformers and poles.
Qualified climber and completed a hurt man rescue.

Maintenance Coordinator
October 2013 – December 2013, Navajo Agriculture Products Industry, Farmington, NM.
Coordinated maintenance schedule for automated potato processes.
Supervised a crew of 4 to ensure conveyor systems were maintained to prevent loss of production during peak production periods.
Kept a record of parts available and parts needed to ensure parts were available at all times.
Ensured facility floor was safe and that all fire equipment was in good working order.
Fabricated safety shields for unsafe exposed conveyor and chain drives.
Ensured automated process showed no malfunctioning units.

Forestry Technician
April 1997 – September 2013, Bureau of Indian Affairs, Towaoc, Colorado
Performed standard first aid procedures sufficient to preliminary first aid and triage as necessary.
Used written and oral communication skills sufficient to effectively interact with people at all levels, internal and external to the organization, including the public.
Utilized computer technology skills such as word processing, electronic mail, internet use, and specialized fire information databases and programs.
Lead a crew in a variety of work in such areas as hazard tree removal, hazard fuel reduction, prescribed burning, recreation, wildlife and watershed, and vehicle and equipment maintenance and upkeep.
Made informed fire operation decisions in regards to related fields such as forestry, range, wildlife, botany, soils and water, cultural and historical resources.
Worked as an fire engine crew member on a type 6 fire truck
Worked as a crew member on a type 1 fire incident out of state
Utilized GPS equipment to locate and mark waypoints and fire monitor sites.

Cable Technician
August 2007- June 2008, Comcast Cable Deluxe Marketing Contracting, Farmington, NM.
Installed cable for Farmington customers.
Ran RG9 cable into homes from neighborhood cable hub which involved trenching or hanging wires to get cable into homes.
Wall fishing or underground pipe fishing was sometimes necessary to get cable to appropriate locations.
Utilized toner to find available wires already installed.
Supervised a crew of 5 who did sales while I installed the equipment.
Used written and oral communication skills sufficient to effectively interact with people at all levels, internal and external to the organization, including the public.

Maintained customer log book with important personal information at all times.
Set up digital boxes inside homes which required my A/V knowledge.

Welder Yard Roustabout
September2004 – March 2005, National Tank Company NATCO (Employee Connections) Farmington, NM.
Disassembled dehydrators, distillation towers, J units, Kettle reboilers, reboilers and various other equipment to for steam cleaning.
Assembled pipefittings on various units.
Cut, threaded, welded pipes to be used on various units.
Painted tanks
Welded various yard racks utilizing stick welding.
Utilized oxy acetylene torch to cut metal into various pieces.
Ran a forklift large and small to move units in and out of shop and yard.
Keep grounds clean and free of debris.

Security Product Development
January 2000 – September 2000, Tuffys Security Products, Cortez, Colorado
Prepared products to be painted utilizing powder coating techniques.
Operated robotic welder which required me to change and maintain the welding spool to insure quick and precise assembly line operation.
Operated a sheet metal fabricator which required me to insert sheets of metal into machine which then cut and punched metal into specific shapes that eventually got welded together.
Utilized a mig welder to weld components together which were made of 20 gauge steel.
Maintained safety each and every day which insured no accidents or down time.
Member of a great team.

RELATED SKILLS

Wonderware software experience
Microsoft: Word, Excel, PowerPoint and Outlook
Environmental Health – Safety
Certified forklift, ATV, D-6 loader, Skidsteer and Backhoe operator
Automotive, motorcycle, small engine mechanic. 12 volt electrician