Millennium Technical Services:

Lead Installation Technician March 2013-Nov. 2014

incharge of installation of Telecommunication equipment

            in AT&T Central Offices

• run, secure, and terminate power cable into BDFB's and to Fuse and alarm panels.
• Run, secure and terminate Fiber Optice cables into NG3 shelfs, Ftb shelfs, and equipment shelf such as Alcatel, and Fujitsu.
• Incharge of completing and documenting all aspects of installation.

Completing all documentation of installation procedures and completion documents of installed equipment.

• Cut, drilled and fit brackets, supports, covers and fixtures from

metal strap and bar stock per TP 76300 standards in central office

            environment

• Installed equipment such as Cisco, Fujitsu, Lucent, Nortel, and alcatel

           to create signals such as (pots, T-1, T-3, OC 48, OC 192)

Comtech

Lead Aerial Technician March 2011/March 2012

• Headed up fiber optic project for out of state market which led to large profits for the company.
• Installed cellular equipment in huts, outdoor cabinets, and on towers (I.E. Mono poles, Self Support, Guy and Rooftops).
• Rigged towers for installation of RF cable, Fiber cable, and DC cable as well as for mounting antennas.
• Terminated DC cable in huts and on towers for LTE
• Mounted antennas, RRUs, Cable, and Squid box on towers
• Supervised crews of 4-8 personnel on the installation and testing of LTE equipment.
• Anritsu Sweep test and Triasx Pim test Lines on antenna change out.
• Trained personnel on the proper installation of equipment.

CSL BEHRING

Parenteral Production Sept. 2009-Dec 2010

• Aseptic gowning and Aseptic cleaning
• Learned all aspects of the syringe fill line.
• Empty bottle inspection and bottle wash qualified.

AT&T Illinois

            Cable Splicing Technician Aug, 2007 to Nov, 2008

• Spliced overhead, underground, and submarine

multiple-conductor cables used in telephone and data communication

systems

• Executed daily operations of reading and applying information

from prints to deliver pots, T-1, T-3, and DSL signals to customers.

• Climbed utility poles, utilized truck-mounted lift bucket, and

descended into underground vaults where cables were located.

• Cut lead sheath from installed cable to gain access to defective

cable connections, using chipping knife and hammer.

• Cut and peeled lead sheath and insulation from newly installed

cables and conductors.

• Tested each conductor to identify corresponding conductors in

adjoining cable sections to prevent incorrect connections between

individual communication circuits and electrical power circuits.

• Covered conductors with insulating and fireproofing materials.
• Worked on energized circuits to avoid interruption of service.
• Fit (3m) waffle cases and (preformed) armadillo cases to produce

an air tight and water proof seal over splice.

Progressive Communication Services (AT&T) Tennessee

            Outside Plant Engineer Jan, 2007 to Aug, 2007

• Planned and prepared drawings for construction of overhead and

underground lines, and cables as well as rearrangement of lines, and

cables to obtain optimum and economical utilization of

communications facilities.

• Analyzed traffic loads, available and existing lines, and estimated

projected traffic to determine new construction, rearrangements and

removals as required.

• Wrote, designed and produced quality prints of lines and cables.
• Was instrumental in getting prints out that were used to get

U-verse to thousands of customers.

• Prepared detailed construction and installation drawings.
• Trained new engineers in turning out quality and on time prints

using the company computer programs such as (Aries) cable

maps.

• Initiated work authorization requests and submitted requests with

substantiating drawings, and documents to management for approval.

Tek Systems Downers Grove, IL

            Installation Technician Nov 2005 to Dec, 2006

• Installed electronic control panels and electrical equipment, such

as electric generator units, battery chargers, and rectifiers in cell

tower equipment.

• Executed daily operations of leading crews in the installation of

battery and power supply equipment.

• Drilled holes and bolted metal framework and supports in place

with electric drill and wrenches.

Communication Test Design Inc. Tinley park, Illinois

            Lead Installation Technician Jan, 2000 to May 2005

• Cut, drilled and fit brackets, supports, covers and fixtures from

metal strap and bar stock per TP 76300 standards in central office

environment

.           · Trained and managed numerous installers and achieved

significant improvements in their productivity.

• Trained new installers on installing equipment such as

Cisco, Fujitsu, Lucent, Nortel, and alcatel to create signals like pots,

T-1, T-3, and up to OC 192.

• Supervised and managed personnel for a telecommunication firm.
• Successfully handled the supervision of employee and contract

employees in a fast paced telecommunication environment to

maintain on time and quality completion on installation.

Dial Comm Telecommunications Bourbonnais, Illinois

            Installation Tech Jan. 1999 to Jan. 2000

• Measured distances with rule to lay out work in telecommunication

closets.

• Connected electrical wiring and cables, using electricians', and

telecommunication hand tools.

• Successfully handled the installation and repair for key and PBX

systems from small offices to large factories.

Education:

Andrews: Connectors, Ret controllers, and Pim testing

OSHA: 30 Hour

CITCA: RF Safety Awareness

Telecommunication Repair Westmont Illinois, (AT&T)

Certificate 2007

Telecommunication Cable Splicing Westmont, Illinois (AT&T)

Certificate 2007

Herscher High School (Herscher, Illinois)

Diploma 1993

Hobbies: Coaching youth softball, and football.