CAP Trained / Siemens

Medic First Aid / SFSI

Harness and Rescue Trained / SFSI

Respirator Fitted Certified

Basic Rescue Training / TSL Trained

Technical Safety Training / Mechanical for Contractors / SFSI

OSHA 10

Forklift Trained

Certified Rigger/ Signal Person

Sky climber Trained

OSBT Certified

RF Trained

Competent Climber Trained

Equipment Operator Trained

RET Trained

Fiber Test Trained

Work Experience:

Velocitel

10-2013 to Present

Forman for Velocitel installing UMTS and GSM systems for AT&T and Broadcast towers. Have the ability to install LTE, 2C, 3C, and  4C. As well as fly up, drop and install boom gates. Fly up coax lines, power wire, antennas, and fiber. Have learned how to wire up the squid, power plants, Argus plant and raycap. Knowledge of how to pre-make jumpers and install the BBU. Have also worked on Tiger Teams troubleshooting radioheads, squid, antennas, raycap, alarm block, GPS, fiber, BBU, Coax lines, and TMAs.

PMGroup/MP Nexlevel

4-2013 to 8-2013

Top Hand for MP Nexlevel installing UMTS systems for AT&T towers. Proficient in PIM testing and Anritsu operations. Extended knowledge in flying equipment up and down multiple types of towers. Knowledge base in multiple shelter types as well as top of multiple towers in different applications, including LTE, UMTS and GSM installations. Knowledge base in multiple coax applications as well as multiple connector types and prep.  Well versed in flying of coax and antennas on tower in a safe and efficient manner.

Wind Energy Service.                                                                              3-2012 to 11-2012

For WES: I did mostly blade repairs and special projects. This job utilized my skill use of hand tools, following safety instructions to the letter, providing a safe environment for my co-workers and myself. We clean-up our work area. I follow directions and am used to using manuals, and work instructions to assist in repair process and inspections of turbines.

Airway Inc.                                                                                                     Summer 2011

For KR Wind: Working with the special projects on Siemens  towers- building rotors, called in mid’s sashes, top sashes, nacelle prepping , bottom finish-Rotor tensioning. With Airway I have worked with Projects on Siemens towers- I did cable pulling on Siemens towers also terminating wires in all cabinets.

Summit Staffing Inc. / SFSI                                                                   3-2009 to 12-2010

For Siemens: Working with the special projects – Blade Repair and Inspection Crew. Assist with grinding and laying of glass repairs according to work instructions under the guidance of experienced Blade Repair technicians. My skills include the use of hand tools, following safety instructions to the letter, providing a safe environment for my co-workers and self. Clean-up our work area. I Follow directions and am use to using manuals, and work instructions to assist in repair process and inspections of turbines.

Mariah Resources Inc.                                                                          12-2008 to 1-2009

For Suzlon turbines: Provided service maintenance as needed for these turbines. Working with specific components: Yaw Motor, Cables work, Chain Hoist on Crane Sail, installation of gear box and change outs, blade repairs, change out accumulator bottles.

RBG LTD.                                                                                                          5-2008 to 11-2008

For Vestas: Worked on Clipper Wind and Mitsubishi turbines. Projects Side – Flying Rotors, Stacked Towers, Prep Nacelle’s for install, fixing Nacelle breaks, Stacking Bases, Commissioning Towers, Team Lead, Installing numerous parts and repairing or change out of mechanical parts to complete a tower for commissioning. Sims Work – 1168 – Blade Mediation in field, tower inspections.

Education:

Jim Ned High School, Tuscola, TX                                 Graduated May 2008

Area’s studied: Computer Technology, Agriculture Mechanics, and Welding classes.

These provided opportunities to make repairs on small engines, and electrical wiring, problem solving, and learning schematics, and how equipment operates, and the functions of parts. I learn all phases of welding: wire fed, stick, and arc.

Excelled at football all through high school.

Oklahoma Panhandle State University                   January 2011- December 2010