install ice bridge and grounded
install battery and connection with temperature probe
install equipment for RBA72 CABINETS & TEV45
Pull and route wiring thru conduits and cable tray
Install cable tray at bottom off RBA72
hookups all wiring for power to cabinet and equipment for start up
Install flex 16 pole with DC-6 AND power and ground
pour concrete foundation for cell sites building and ground building
climb tower (300 )
help prep antenna for tower also moved antenna while on tower
dig trenches for conduits and hung conduits with proper support
ran and hookup FYI
prepaid picture, JSA for daily report

Rightech staffing xxx-xxx-xxxx Woodbridge, NJ

Journeyman

Audited cell site with effective report and pictures upload to office and fix whatever was wrong

Glotel staffing xxx-xxx-xxxx Chicago, IL

Wireless tech

Dig trenches and ran conduit

Mounted Hoffman boxes

Install ceianna brackets

Carolina Insulation & Firestop 2009 – 2010 Florence, SC
Insulation Installer
Accurately measured, cut and installed materials such as fiberglass and foam into houses and other structures.
Used numerous techniques such as taping, wiring, stapling, and spraying to effectively insulate pipes, floors, walls and ceilings.
Covered insulation with other material such as sheet metal, to protect it from being damaged by weather or other forces.
When insulating pipes, the material had to be stretched open along a lengthwise cut and then slipped over the pipe.
When insulating walls and other flat surfaces mostly used wire mesh which when placed against the wall.
Also used mesh that when placed against the wall, provided a rough surface that would allow foam insulation to stick when sprayed on.

TCI Insulation – 2008 – 2009 N. Charleston, SC
Insulation Installer
Measured, cut and installed materials such as fiberglass and foam into houses and other structures.
Used many different techniques such as taping, wiring, stapling floors, walls and ceilings.
Used a variety of tools to effectively complete jobs including common hand tools and compression sprays.
When insulating pipes, the insulation material was stretched and open along a lengthwise cut then covered the foamed wall with drywall plaster or paneling.

David Insulation 2008 – 2008 Augusta, GA
Insulation Installer
Measured, cut and installed materials such as fiberglass and foam into houses and other structures.
Laid out and cut insulating materials and fabricated insulation covers.
Determined all measurement specifications for specific jobs.
Inspected all work in progress to determine conformance to specifications.

Guardian – 2007 – 2008 Charleston, SC
Insulation Installer
Measured, cut and installed materials such as fiberglass and foam into houses and other structures.
Planned, directed, and recorded maintenance standards; recommended or initiated modification or replacement of faulty equipment.
Completed prep work including foam and caulk, fireproofing, baffles, wind tunnels, filling joist spaces, etc.
Loaded and unloaded building materials.
Completed safety checks and basic maintenance of trucks and equipment.

CTIS – 2006 – 2007 Hanahan, SC
Cable Technician
Installed, maintained, and upgraded cable systems.
Performed repair work and responded to service problems at the homes of cable users.
Serviced feeder lines, which connected the main cable to small groups of homes, and droplines, which are the direct cable lines to a subscriber's home.
Used meter to read signal to determine is line is bad or good.
Filled out all necessary reports and paperwork.

Condustrial, Inc. – 2005 – 2006 Charleston, SC
Pipe Insulator
Measured different size of pipe and related materials according to job specifications using fiberglass, calcium, silicate, polyimide foam, and electrometric from pipes, bulkheads, components, and ventilation systems.
Used hacksaw, hammer, and assembled and installed variety of metal and nonmetal material on tanks.

Gale, Inc. – 2000 – 2005 Ladson, SC
Insulation Installer
Measured, cut and installed materials such as fiberglass and foam into houses and other structures.
Used many different techniques such as taping, wiring, stapling floors, walls and ceilings.
Used a variety of tools to effectively complete jobs including common hand tools and compression sprays.
When insulating pipes, the insulation material was stretched and open along a lengthwise cut then covered the foamed wall with drywall plaster or paneling.

Ace Security – 1998 – 1999 New London, CT
Security Guard
Patrolled area beaches and apartment complex.
Monitored Gregory Stores at night.
Enforced company’s policies and procedures while adhering to all safety rules.
Reported all incidents, accidents or medical emergencies accordingly.
Called local police department when back up was necessary.
Wrote reports of daily activities and irregularities such as equipment or property damage, theft, presence of unauthorized persons, or unusual occurrences.

Anchor Insulation – 1997 – 1998 New London, CT
Pipe Insulator
Covered boilers, pipes, tanks, and refrigeration units, with insulating materials, such as asbestos, cork, plastic, and magnesia to reduce loss or absorption of heat, prevent moisture condensation, and to deaden sound.
Brushed cement on asbestos cloth to obtain smooth finish and covered piping with cloth.
Fit thermoblock and magnesia-block insulation around insulating boilers, evaporators, and turbines.
Wired insulation on machinery and staples wire netting over insulation.
Put cement on wire netting to protect insulating material.

General Dynamics (Gov. Defense Shipyard) – 1990 – 1997 Groton, CT
Submarine Builder/Pipe Insulator/Lagger
Performed all types of pipe insulation aboard nuclear and non nuclear submarines.
Traveled to different Navy ship yards to perform insulation tasks within a time frame, and worked with other trades.
Was rewarded for completing a job in Seattle, Washington 500 hours before the scheduled time frame of completion.
Took safety training classes according to OSHA Regulations.
Held top secret, confidential security clearance.
Used many different types of tools to complete jobs like towels, wire cutter, knives, scissors, boogie hooks, tape measurer, band saw, miter box, sawing machine, needles and pad shreds.
Also installed insulation on hot and cold nuclear or pipes to maintain the right temperature and space ability for pipe on submarine.

Education
Belford High School - Colbert, GA

Received High School Diploma

Skills/Training
Computer skills with proficiency in MS Windows OS; MS Office including Word, Excel, Outlook and PowerPoint; proficient in software applications.

Installation Power tools and more

Government Security Clearance

RF training

CPR

OSHA30

Tower Climber Safety Training (Comtrain)

References
Available Upon Request

JONATHAN ALSTON - RESUME
2015

3 | Page