Certifications

• OGUK Medical (formerly UKOOA)
• Rig Pass 8 hour (SafeGulf and SafeLandUSA)
• Rigger Safety
• Offshore Water Survival (HUET)
• 8-Hour Standard Fall Perfection
• TWIC
• Fist Aid
• Bioest
• 1998 Days No Incident report
• Work Safe Cert

Work History
F/S Operation Techanican

Rigger, Technip Deep Blue vessel/Julia project trip 3, March 2015-April 2015
• Offloading and backloading of materials
• Operating overhead crane performing heavy lifts
• Assisting technicians with maintenance
• Contributing completion of onsite task based risk assessment
• Loading straights into the carousel

Load Out Lead Supervisor, Tecnip Deep Blue Vessel /Exxon Mobil/Julia project/January 2015-March 2015
• Loading Buoyancy onto Ship carousel
• Coordinate communication and operation with the Deck Foreman
• Rig Plet Platform (95 Te.) assemble cables to proper anchor points
• Load Plet onto the (MWP) platform onboard vessel
• Coordinate with (120 Te.) Crane make lifts through out the trip to JULIA Installation

Rigger, Compass Personnel Services/Saipem umbilical project, September 2014-December 2014
• Worked in Panama city spool base and spooled three different umbilical on two different spools.
• Job entailed a lot of packing when spooling was being done.
• In charge of commanding the control tower to come up and/or down in order to keep the spooling correct.
• Organizing tools out of storage containers
• Organizing slings and chokers for lifting operations.
• Lifting PLETS and Wellhead from key side of the vessel.
• Cutting wood materials for packing up the umbilical.

Load Out Lead Supervisor, Saipem/Exxon Mobil, August 2014-September 2014
• Spool and secure umbilical onto HLV carousels
• Secure containers on HLV
• Perform all sea fastening
• Coordinate EPC3 and HLV movements with the Port
• Coordinate communication and operations with EPC5
• Control Ingress/Egress of EPC3 personnel
• Ensure safety of EPC3 and SAL personnel

Rigger, Tecnip Deep Blue vessel/Shell, May 2014-June 2014
• Offloading and back loading of materials
• Operating of overhead crane performing heavy lifts
• Assisting of Technicians for their maintenance
• Contribute to completing onsite task-based Risk Assessment
• Loading straights into the carousel

Offshore Marine Construction Surveyor,SubSea7,Skndi May 2014-June 2014
• Properly install and conduct as-builts on new lay pipelines; to properly install wellhead,PLETS,PLEMS.
• Commission new lay pipelines
• locate and probe pipelines for dig and repairs
• maintain Right-of-Ways for clearance and areal flyovers for inspects.

Survey Shift Manager, Utec/McDermott vessel/Shell, April 2014-May 2014
• Shift manager for pipeline survey and report analysis
• Measuring pipeline
• Maintaining accurate logbooks
• Analyze data
• Troubleshooting survey issues with Engineering department
• Managing Akers Solutions /survey/rigging personnel to ensure proper survey markings
• Vessel lay tower/tensioner survey
• Checks.Vessel sea fastening positioning

Supply Vessel, Arabian/Tecnip Project/Norman Commander, March 2014-April 2014
• Transit to the GOM and perform cargo trainer and personal transfer to aid the Norman Commander
• Secured Cargo
• Loading and offloading JUMPERS,VALVES,MAINAFOLDS,RIGGING

General Dynamics Information Technology /Field Foreman/Internal Operation, Syracuse,NY January 2011-November 2013
• Extensive experience in planning and execution of special projects on deadline in critical environments
• Resolved employee technology issues with employee production
Vocational Training - Nokia Siemens Networks ( Nashville, TN )
• Planning and conducting critical inspections on communication tower and preparing reports detailing issues found and resolutions applied
• Daily communication with clients, contractors and management to consult on various tasks and projects
• Construct safety reports and conduct briefings with personnel
• Organized management in simulated risk assessments
• Provided training of staff in safety rescue and fall protection, assuring compliance with all regulations
• Worked with OSHA proving documents, training, and safety analysis for projects and staff
• T-Mobile,USA Project Field Forman for all project relation for New Build, Upgrades and ESD in Up State New York and Tri-State
Responsible for all Construction & development Deliverables for design Visit to site completion
Compliance,SAC, RF, Zoning, Permitting, Operations and General Contracting / Hard Cost Vendors
Nextel Communications Daily site visits across multiple projects

Floor Hand/ Lay Down Operator/ToolPusher/Torque Turn Operator, Tesco Inc., January 2010-November 2011 Indiana,Pennsylvania
• Experience in using and maintaining heavy lift tools, drill tools, safety equipment, and tool inventory
• Eckle hydraulic tool experience
• Conducted repairs, loading CDS Tool and Power Tongs onto crates
• Rigging and lifting 20-30 ton tools on and off the rig floor
• Performing pre-inspections and post-inspections on all tubular equipment and machinery
• Preparing post project briefings, reports and analysis
• Laydown Operator responsibilities encompassed a variety of tasks and maintenance with hydraulics including:
• - Main pumps teardown and rebuild
• - Valve bank rebuild
• - Hose connections and fittings
• - Cylinders repacked
• - Power takeoff rebuilding (shafts and joints)
• Inspecting all tubular piping for quality control and records
⁃ Inspecting API SPEC 5CT/ Boxing Casing
⁃ Assetting with crossover joints size variations 2-3/8", 2-7/8", 3-1/2", 4", 4-1/2"
⁃ Experience working on platforms,Triples,and doubles
⁃ Install hardware setup for Torque Turn operation,responsible for graphs and reports
⁃ Working with Vendors such as : Superior Performance,Cole Enterprises,SGS
• Managing floor hands, ensuring all tasks are conducted in safe and productive manner
• Ensuring repairs are completed to deadline
Diesel Technician/Lubricate Specialist, Lecon INC September 2008- November 2010
• Troubleshoot engine problems, make recommendations for repair, and create estimates based on proper diagnosis, repair, or replacement
• Conduct annual and routine maintenance of diesel engines and parts
• Service and Change out Pins and Roller for Excavators,Bulldozer,and other Construction Equipment
• Reconditions and replaces parts, such as pistons, bearings, gears, valves, and bushings, using engine lathes, boring machines, hand-tools, and precision measuring instruments
• Main pumps teardown and rebuild

Education

Texas College at Tyler (xxx-xxx-xxxx)

Austin Community College (xxx-xxx-xxxx)
Tyler, Texas
32.00 hrs Business Management

George Bush High School (xxx-xxx-xxxx)
Houston Tx
High School Diploma